Fitting 35’s with minimal trimming NOW ADDING LONG TRAVEL AND 934 CV’s

20min in, gotta get this done so I can get home to help my wife get ready for thanksgiving... or not

 

Bumped...

 

Thats nuts it only took about 30 mins to cut off that factory bump blob thing and mock up a bump and can!?

 

he's done this kinda stuff before and they have spares of just about everything they make for this reason.

downtime between adrenaline highs should be minimized at all costs!!

 

the dude is a magician so it should be no surprise. Just because he can do it in under and hour doesn't mean it only costs an hours worth of labor

 

Kind of makes you ask why it was not done in the first place.

 

Fiending lol

Oh yea i am well aware of this

 

I'm guessing Harry knew full and well it would be coming back for bumps at some point and like all of us even @kasnerd has a budget

 

I asked about it initially and we decided no hydro bumps to get all the travel as possible with the free bleeds opened up.

Had icon hydros on the rear with the last setup and didn't like it...now it's not a choice. haha either slow down or hydro bumps. Well you know the answer seeing tacked in bumps.

 

I was blowing through travel with mine opened up. I had to close it up almost all the way to help stay off the inner fenders.

 

Bumps are mounted, paint is drying... passenger cam bolts were bent inside the tabs. Put new ones in and back for alignment tomorrow

 

I have no words to convey how floored I am. Beyond the moon.

 

A small attempt on my part even though I didn't (I told you so). Glad to see Harry is getting it sorted so quickly.

 

We always do whatever it takes to keep our customers trucks in the dirt

 

So the bent lower cams were bent enough to push it back 1/2 an inch? Guess we will find out after the alignment but if so..

 

I mean, that’s about the best possible weak link. Cheap and easy fix. I’d bet that hit would have folded the factory lower pivots.

 

Can I sleep on your couch until the fenders are done?

 

And just like that @kasnerd is back from the dead... off to an 8am alignment

 

@kasnerd how do you like the stop tech rotors? Noticeable improvement over factory calipers?