Tesla style head unit

What are these plugs? I didn't have anything that fit there and I don't see them listed in the instructions

 

The bottom pic looks like that plug from the main harness that goes down towards the climate control plugs

 

The middle pic is the antenna plug it probably doesn’t look like that on your harness though

 

Your antenna wire and plug should look like this

 

Hmmm. Alright, I didn't have anything plugged in there, maybe that was my problem

 

The antenna from your truck should plug into this here

 

That bottom pic you posted should have a plug from the main harness that looks like this plugged in there

 

That's from the units new harness back into itself? Basically connects the top of it to the bottom of it?

 

Yes thats correct

 

I found that plug, it was zip tied in too tightly to reach but nothing a pair of snips couldn't fix. Will attempt reinstall

 

Cool sounds good….according to the directions thats the can plug so the first time you installed it wouldn’t have had any steering wheel control or anything so you should be all set now

 

Ok, much better. It's installed well enough to drive with, but I'm going to have to remove again. My front camera doesn't work and there's no GPS for nav, I'd like to figure out how to make the shark fin work instead of using the GPS that came with it

 

Glad to hear….maybe @arcenik can help you with the adapter for the shark fin I believe he found one that fit his.

 

LInk to antenna adapter.
https://www.discountcarstereo.com/sumi-fakra.html

It works but it does not have the connector to lock it together. I just used a little tape and its been working great.

If I remember correctly its the white plug is the shark fin and the black is xm and not used.

 

I also go over the harness in this video.

https://youtu.be/9E_jqVJ75bs

 

Ok, I have the adapter but got confused by the lack of plug and which one to connect to

 

Did you buy it or did they include it?

 

The "Back" wire, could that be used for a front camera as the signal wire?

 

I bought it. My unit came with a camera and wires, which I don't need, but appreciate the thought

 

I connected my front cam to the accessory wire off the main harness, so any time the radio is on the cam is powered. This would let you view it anytime. The back wire is if your radio does not have a reverse camera, I believe its an input not output.