What Have You Done To Your 3rd Gen Today?

Or a paper clip

 

I run a hardware store. I’ve got those. I just haven’t tried it yet. Thanks I will probably do that. Wish me luck

 

How much water does it hold?

 

So, added my rear 5100 and a 1 inch block. Also my spc arms got my caster to 3.2/3.5 in the front. Added 1/4 inch shims to my front that is set at 1.1. Total measured lift is around 1.8 inches in the front now. With 1.25 inch spacers

 

I would guess about 5.8 gallons

 

Assuming that's 4" pipe and the total length (including elbows) is 9.5' it should be close to 6.2 gallons.

To determine the capacity of a cylindrical tank

Area of tank head = diameter squared X .7854

Multiply answer by length to get cubic content

Convert cubic content to gallons (one gallon= 231 cubic inches)

Be careful to use all numbers in either inches or feet (DO NOT MIX UNITS)

 

I was thinking 4inch by 9 feet

 

Hey JohnB81, where does that separate module get installed (the one with the antenna) behind the dash also?

 

Threw on a Leer 100XR and waiting for the Prinsu racks

 

The rack will dress it out nicely.

 

What have I done?!?!? Behold the monstrosity that is... "The Christmas Taco."



Edit: I bought and installed the only cap I could find in the area...had to drive 2 hours for it even.

 

She'll be easy to find at the mall.

 

Thanks so much! They’re from Unique Style Racing. I was on the notification list for Meso and found these in the meantime, so I jumped on it!

 

A man embracing Christmas this way brings a tear to my eye

 

Yesss! It’s exactly that. Secret squirrel level achieved.

 

that looks like sheetz

 

There's no such thing as an ugly Taco, some are just prettier than others.

 

it was a joke...
you know, because the picture was taken at a sheetz....

 

With a filled capacity weight of approximately 52 lbs. I just wanted to throw some stats on this subject since you inspired me with all your math.