What Have You Done To Your 2nd Gen Tacoma Today?

That ones is much slower. only 1.06 CFM vs 5.65 on mine.

 

well it certainly passes the beer test mentioned above, at least with my tires. Im not in that much of a hurry to get air in my tires I guess.

 

Speed, longevity. But mostly speed and longevity. All of these compressors get hot, the best ones are made to handle it. It’s one thing if you’re just airing up a beach ball to 3-5psi but if you’re going to let the air out of all four 285’s you damn well better be sure you can put it back.

 

I based my Amazon purchase on the 27,000+ reviews. I can only speak for this compressor but it works great.

 

Glass came in. Their customer service might suck but the quality is actually better than I expected. Will fit this weekend and after some definate finishing and touching up, should be in paint by end of december

 

Oh wow I thought it would take way less time with 5.65 CFM compared to my Viair 87P at 1.26 CFM. I thought I had the 88P (1.47 CFM) but I had to check lol
Maybe it's not even worth to upgrading.

 

I could be mistaken It might be more like 10 mins to all of them. I take my time when doing it and always check with a second gauge since I don't trust the one on the hose itself.

 

Also the cigarette lighter plug is not the best design. I much prefer the battery clamp.
But... whatever floats your goat bud!

 

Needed a few more AMPS mounting patterns for what I got planned down the road, so CNCed this new dash mount. Didn't even need to drill any holes in the dash or use sticky tape and my phone isn't going anywhere, especially with the Hondo phone mount.

 

More gear for the holidays!!!

 

Kaboom just waiting to happen

 

How did you mount that?

 

Now that winter temps are here I've been using the seat heaters with my Wet Okeley seat covers and it is amazing. They warm up very quickly and having one on the seat and the seat backing is great. The wife enjoys it so much that she doesn't mind how much they cost lol.

 

The heated seats is one of the Reasons I went with the Limited; at that time. Keeps my back from being sore on long drives etc

 

Little hard to give the full picture, but I have some thin straps running between the dashboard and head unit that mount underneath the dashboard. The straps are connected to the CNCed fixture by a rod with screws to adjust the tension.

 

https://www.tacomaworld.com/threads...en-tacoma-today.6499/page-11344#post-26537890

love these wheels but could not find them on KMC website.... any ideas??

 

Put a decal on.
Changed a tire for an old fella
Pushed a Ford off the road and used my pocket jump starter for the 8th time. Man those come in handy.

 

Well it's not quite today, but this: https://www.tacomaworld.com/threads/1gr-fe-rebuild.743548/

 

Not the KMC website but they look like the same wheels https://www.4wheelparts.com/p/kmc-km722-technic-anthracite-wheels/prod7480004

 

Oil change, spark plugs, and air filter

paint is the next project