What Have You Done To Your 3rd Gen Today?

Is this the smoked black ones? They look kinda clear. I can’t tell.

 

Not sure if these would work, they may as that bolt has a little bit of flat edge on it. Lots of different sets on Amazon find one that'll fit.

$24 THINKWORK Bolt Extractor Set, 13+1 Pieces Impact & Nut Remover Stripped Lug Remover, Extraction Socket Set for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts Screws

https://www.amazon.com/Extractor-TH...ipped+Bolt+Socket&qid=1638055623&sr=8-1-spons

 

Got my Diode Dynamics SAE compliant SS3 fog lights today and put them in. holy cow are they bright! On the road they drown out my headlights. Not sure if too much lol

 

You'll be getting flashed at if you use them on road!!

 

They're for using on the road in fog.

 

Spent way to much on tint, but needed to be done.

 

I liked the little vintage tri-color grill badge so much I had to go find it on Amazon!

 

Blame a company for not having issues with their bed bolts on an install video because you did? Seems about right

I had no issues breaking loose with a 18” breaker bar leaning over the tailgate feet on ground.

 

I did this install today too but didn’t have that much rust on that specific flange. Now the flange at the other end of the y under drivers side cat looks like it’s all fused together.

Stock gasket was toast imo (it’s cheap enough there’s no reason you shouldn’t change it out). I took a wire brush to remove as much scale/loose rust as I could and cleaned it up before putting the new gasket on



You could definitely manage/fight the removal/install with 1 person but you’d likely be banging against everything. I had the ol lady give me a hand and we managed it relatively easy weaving it in, around and out. We actually had fun


The hanger pliers were f’n great (with the addition of soapy water squirts). If you don’t have the instruction sheet- go get it and follow the order of removal so your not fighting it. I did lift it up as high as my stands would go and lowered the diff (watch your lines); removed the spare also.

 

I torqued it down to 35 and evenly but noticed this gap… anyone know if this is normal?

 

What's the weight rating on those wheels? I'd make sure they can support the vehicle or you'll be in for a crushing surprise.

 

So. Driving lights not fogs. Packing slip said fogs. But the inner packaging confirmed driving.

 

I got one of them too. Love it.

 

Sure doesn’t look it. Were the faces flat when you started?
Is it leaking?

 

Once it warmed up a little it was a great day to give the Tacoma a bath!

 

I would try reaching out to whoever you ordered them through, hopefully they can just send you some white fog lenses.

 

already in contact. since they dropshipped directly from DD it sounds like they have to contact them about it first. SUPER NICE lights, just not what I want for fogs LOL. If I could just get the correct lenses I'd be more than happy.

 

Perfectly normal!

Some flange clamping systems have strong coil springs with longer bolts clamping the flanges together. That way the flanges don't need to distort in order to provide pressure to the gasket.

Of course, the sealing gasket is "special" for such systems. sometimes donut shaped.

 

dip can in your pocket or are you just happy to see us?