Eibach pro lift kit

Got the lift and tires put on today!

 

Finally got around to installing my kit from Headstrong, coilovers set at the first notch and the Deaver add a leaf for the rear (swaybar relocation brackers included). Really like the stance and don't notice much if any change in the ride. The steering feels heavier to me is about the only difference I can sense. Now, if my damn tires would get here I'd post a pic...

 

1st notch, 1/4" top spacer on right, 1/2" top spacer on left, JBA UCA, Icon AAL, .5" block, removed overload. My build thread, https://www.tacomaworld.com/threads/japjoe7-build-thread.742561/#post-26436497

 

I guess it goes both ways. I've been on the 2nd clip for over a year and it rides great in my opinion. It might be stiff to some though. I went to this setup after installing a 3" front spacer the year prior so anything other than a spacer feels great to me lol

 

Looks great. Thats the exact setup I did. I love the JBA's

 

Yeah, I was going back and fourth over doing the 2nd clip and no spacers or 1st clip with spacers. My rational was 2nd notch would compress the spring a little more on an already 720lbs spring so I'd rather just do a spacer. I'll rarely go offroad so shouldn't be an issue with spacers. Same goes for the back .5" block rather than keeping the overload and having the cutting off another U clamp. I wanted a minimum of a 2.5" in the front and 2" in the back.

 

That makes sense. I did the 2nd clip, no spacer except the lean spacer, got rid of the over load spring and did a Toytec add-a-leaf and no block. I ended up getting about 3" in front and 2.5" in the back.

 

Love the setup!! Wheels and tire specs?

 

1st notch and 1" eibach block in the back for now. I bought the front struts and springs separate and kept the bilstein 4600s in the rear. Cost me less than $500 doing it that way. Selling my factory wheels with 8k on here soon to offset some of the cost.

 

Thank you! Tires are Wildpeak 265/70/17, wheels are Motegi MR149 17x8.5 ET0

 

Have done my due diligence reading all these threads. But just to confirm, I should be all good with this combo - assuming the sway bar relocation comes with the kit from TacomaBeast right? Going to go with 1st clip.

 

I would make sure they are assembled in the cost as well.
I ordered mine from Wheelers Offroad and being a first time purchaser you also get an additional 10% off and you can opt to have them assemble them for you.
But that does look good otherwise. Also, I would suggest an aluminum strut spacer instead of the plastic one if they have it.

 

sway bar kit came in my Eibach box, should be with it.

 

Appreciate it! Copped both. Can’t wait

 

Seems like just last Black Friday I got mine from Wheelers OffRoad assembled for a killer deal. Ah the time flies!!!

 

How much y’all pay for installation + alignment??

 

I took mine to the dealer and they charged me around $500. Not many people know but the dealer will also normally price match other local shops for install costs.

 

Anyone know of a sale source for this kit? E86-82-007-01-22

 

I wonder if they will price match the price of a self install, zero dollars