TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

I’m sure that will be awesome!

 

Now that looks like a nice family car.
















That screams like a dragon when you put the hammer down.

 

Damn that's nice!

 

The car is tits…

 

I'm just glad your going to a Lexus!

 

i respect your reason for change. i bet that car handles amazing too.

 

I’d rather take an M3 with manual gearbox

 

Only if you want to have yearly shop visits lol. I know this pain

 

That car is gonna be the end of an era. You should love it!

 

Depends which M3 lol

 

Anyone have photos of the intercooler lid underneath so I can visually see where the seals/foam strip/o-rings go as I plan to tear into the engine bay in the next few months and queue up my parts orders?

 

The o-rings are in a groove on the lid itself. There is also a bead of some rubbery sealant that is in between the intercooler and lid, it's stuck to the lid in this picture.
In the picture below, the intercooler and lid area separated like a clamshell, so the sealing rubber bead would go on the side my finger is pointed at, closer to the blower and further away from the intake ports.
The orange foam strip goes around the sides and bottom of the intercooler, on the same side as the rubber bead / closer to the blower and further away from the intake ports.


I also have 13 extra m8 x 1.25 x 30mm stainless bolts and 9 extra matching copper washers if anyone is interested.
The bolt head is 1/2" (IDK what came with the SC because mine was missing)
I can throw a pair in an envelope and send them to ya.

 

Reflashed today, and started laughing as soon as I took off for a test drive. Its night and day difference! Well done man. Well done.

 

Might be a chance this will fit…
https://www.rr-racing.com/RR-Racing-Supercharger-Kit-Lexus-RCF-GSF-p/rcfscr1001.htm

 

They run the 5.0 in the Dakar Hilux trucks.

https://m.youtube.com/watch?v=QUfK8h5GuZs

 

About time you got flashed!

 

too bad support has been as bad as OVtuning. Club Lexus peeps always be complaining.

 

And then trade that in for the rumored 4.0 TT ISF

$10k for a rotrex kit…RR Racing has and always will be on some fierce drugs.

 

Another spark plug that will work... Toyota 90919-01276, NGK 91961 DILFR7K9G. It comes in the Lexus Turbo 8ARFTS.

 

Fellas…. I may in need of some help. I had a Afe pro dry CAI, which I sold. I went to the URD tcai which is now reeking havoc on my ecu and throwing my afr’s all over the fucking place. I’m in the process of buying another afe and in doing so I was looking at the directions. In this step of the pic below, it says to:

“Remove two of the isolation mounts from the stock intake housing by pushing the metal sleeve out and then removing the rubber grommet from the housing.” Then insert them into the afe box.

so……does anyone still have their stock intake lying around that can send me these little items? Pic below.