What Have You Done To Your 3rd Gen Today?

I just put mine back up after removing for the exhaust. It was 16psi (my fault for not dropping it sooner… ever in the past 3 yrs). It could of gotten loose due to loss of air? But that’s what I didn’t do is lubricant- you spray or just goop it

What patches

 

Thanks for the reminder. I've been meaning to air up my spare.

 

Thanks Bully for the inspiration. I blacked the logos on my wheel caps.

Pop the caps off, wash the spiders out of the back, set the cap on a coffee mug or similar, and take a screwdriver to the back. Come in from the side, tap down on the clip toward the center of the cap, and pull the logo off from the front.


The clip that holds the logo onto the cap goes out toward the outside of the logo. Bad picture but you can see the shadow of the clip on the granite.

I spray painted them gloss black (it's what I had in the garage; the other choice was bedliner), let them dry, and snapped them back onto the caps...

...then snapped the caps onto the wheel. I've got black lug nuts on my Christmas list.

 

Yesterday, I put my Christmas lights up



Today, she got to play in the Mississippi dirt

 

I don’t think it was snug. In the past it usually takes some effort to crank down the spare. It was way to easy to lower.

I used the white lithium spray. It’s perfect for the hoist contraption.

A (don’t worry I Zip-tied it) Patch and a Toyota Patch.

 

You zip tied a patch? I was hoping for a picture

 

I added a set of Ditch Lights from Cali Raised on their low profile brackets. The lights, brackets and an OEM style switch with wiring harness were $150.00 delivered. They put out quite a bit of light and I think they look great.

 

Looks good! I've got the same brackets, but I'm going to be using them for spot lights.

 

I’m guessing something like this, not a tire patch.

 

Took her for one last hunt of the year...no luck But was happy with the gas mileage. Gave her a deep clean today

 

Installed the Auxbeam auxiliary fuse box/ control panel (don’t have switchpros kind of money to waste) this afternoon in preparation of adding additional accessories like lights and such.
I was actually impressed with the quality of the parts with the Auxbeam product so far. Was expecting cheap plastic and was pleased to find most of the housings were metal.
Modified the supplied bracket to fit perfectly between the engine fuse box and the brake master cylinder.
The control panel is temporarily mounted until I get the custom interior panel from my Christmas list.

 

Sorry for the night picture.
This is the drivers side rear seat area with the seat down and a carpeted foam piece I keep for kneeling when tinkering with the truck, and its also good for patches.

 

Clay bar'd the sap off the paint and 3d printed a few items for it.

 

Ooooo, don't be shy. Share what you 3d printed!

 

Gas cap holder (Yes, I know but the printer is new so I had to try)
Center console divider
Square console area AirPods/Pen/Card holder

 

LOL! I was waiting for this^^^^^^^^
I work out of town, I'll get pictures up when I get home in a few days.

 

Put together set of brand new summer season tires + 2 spares (my used, 5/16" tread).
Yes, it's Wrangler adventurer Kevlar, stock tires most people so bitching about.
You know, I ride a set for two seasons, almost 30000 km, and besides lifespan I'm impressed.
for me they were good on rocky backroads, good on wet clay and grassy inclines, ocassionally
very good on snow and ice. I don't expect more than 25000 on them, BUT: the cost of this new set
for me is $600 CAD, including installation and balance.
Can't beat this!

 

Cheap and super easy install.Grill lights!
Off.


On.