What Have You Done To Your 3rd Gen Today?

Man, those look great on the white paint! Kinda envious.

 

Looks good!

 

So after waiting more than half a year for some new KTJO bowl lights to get back in stock, I FINALLY got my driver side replaced this morning. Not overly challenging (and purely cosmetic) to do.

As a side note: I know about the bad/mixed reviews for KTJO products/customer service. But I caught them on sale and needed driver side replaced. Also, when I ordered mine, I was under the impression I was ordering just 2. I didn't really get a chance to inspect them until today ( a la rushing out the door to work), but I got 4 in my box. So I don't know if that was an error on their part, or not. But if anything, I've got 3 replacements if needed.

 

Someone on here will know. I haven't tried the OEM jack since lifting, but did toss a 12" long piece of 4x6 in the bed to have just in case I ever needed it.

 

Added The Noco Boost XL GB50 with the Heavy Duty Case to the Truck Accessory arsenal.

 

Looked at those online and they look nice. How many amps do we need? I see 1500, 2000 and 3k.

 

Not sure about the height, but these are great for the stock jack.

https://sites.google.com/site/landcruiserproducts/jack-adapters?authuser=0

 

I already watched your video last night since another member mentioned your name (figured you’d have to have one up)

I sent an email to the company asking if the rear most panel can be installed without the rear section or if it would cause a teeter totter type thing. I could use washers on the rear bolts to have it even if so. The rear section might/likely be in my way of another accessory so I Also asked of the possibility of buying just the rear pieces for both sides.

 

RCI Roof rack installed. A quality piece that went together easily.

 

400 - 600.

This is a good read on the Topic.

https://www.xenonpro.com/peak-amps-vs-cranking-amps-vs-cold-cranking-amps-jump-starters

 

3" ARB OME suspension lift with OME leafs. Threw some Cooper AT3 285/70R17s on as well with KMC impacts. Rubbing is not a factor!

 

I can check a bit later today, but you might be okay given the pro is 1 inch taller.

 

RRW Hybrid Bumper

 

The wheel weigh around 20 lbs, very light compared to stock wheel.

 

seems 1500 is more than enough then

 

Not any upgrades today but I am pulling a trailer loaded with steel and have the burn pile going.

 

nice shot! post that up for 2022 calendar submission if you're interested

2022 Tacomaworld Calendar Submission - 3rd Gen Tacomas

 

I borrowed this idea from @DVexile back when I had a Two inch lift on my 2014.

You use a 4Runner Bottle jack and remove the top round piece so the Safe Jack accessories fit on it correctly. The T4R jack is the correct diameter for the accessories.
I purchased the T4R jack off of eBay.
Part # 09111-35150.

I also have the Safe Jack 3” extension that’s not in my photo. These SJ parts are not cheap. I really like the setup.

 

12 1/2" fully extended.

 

Great idea Just submitted it!