Colorado Trading Post

Where in Colorado are you located?

 

rip

 

Tuck tail and

I wish this were the next model up fender. I am looking or one to amplify my harmonica and need tone adjust like the fender 15

I'm curious how the fender sounds with a harmonica mic.... The lack of tone adjustment makes me think they won't suit my needs though. From what I recall it is a great beginner amp and someone kid would get good use if learning guitar

Glws

 

you're welcome to plug into it and see how it sounds.

 

Going off your profile, are you down by Parker? Curious if you come west or north at all.

 

Denver Metro. Lakewood to be a little more precise.

 

I think I did last time I was in guitar center

 

Anyone have an old AV receiver sitting around unused? Looking for hdmi, and 5.1 sound output.

 

I can haul it down to the south side of Denver if your more likely in my area

 

check craigslist and your local thrift shops, over the years I have collected 2 and paid less than $20 total for both

I wish I could say I'm ready to part with one but not yet. Thinking about ditching my living room setup for a 2.1 soundbar though

 

Posting this here and the BS thread...

Im currently installing aa OME kit on my 01. I found out the hard way that I need to disconnect the brake line to droop the axle enough to get the packs in. Im in a pickle with 2 problems...

#1: I can't get break the nut on the brake line up by the frame, and its already starting to round from trying. Does onion have any tips on getting this nut loose? Ive PB blasted it and it still wont budge.

#2: I would just throw everything back together and take it to a shop to have them install an extended line... but I had to cut the forward leaf bolt out to get the pack off, and its seized inside the eye. So my truck aint going anywhere.

Which leads me to my questions... Does anyone have one stock leaf pack I could borrow / have (lol) so I could drive this thing somewhere to get a new brake line installed? Or... Is anyone out there willing to come help me get this brake line removed so I can move forward with this install. (im in Broomfield)

 

I believe the hard brakes lines actual use a "flare" nut so you need a Flare wrench or it rounds like you said. I think you can borrow one at any auto parts store.

 

I’m looking to install new leafs soon, may have something for you if you can wait through the weekend or so

 

That flare nut wrench is worth buying and tossing in a tool bag.

 

Brakes are way overrated.

 

got it it all. thanks dudes.

 

I'm up at i-25 and 58th part of almost every weekday.

 

Hey Death you still got these? I could use them @ work. I’m in Denver though. If your down here let me know

 

I'm headed to Boulder Toyota tomorrow if the TW Express would line up with that.

 

I got cash if that’s okay. It’s for my school - they can certainly use the amps

I have PayPal too~