What Have You Done To Your 3rd Gen Today?

How do these look at night? Very bright? My endeavor rack has a spot for 3 of them and I want that lens.

 

I’ll try and get a pic tonight.

 

The OBD adapter is the way to go. Garmin usually has them backordered so search the model online and you'll probably find a site with them unstuck. I got mine form the link below but they're now out of stock, but search around.

https://www.gpscity.com/garmin-dash-cam-constant-vehicle-power-cable

 

Right on thanks for the info. Hope mine ships soon then. I was considering the prinsu rack as well but wanted to get something different from the herd. Good call i think

 

Any tips on taking that panel off to access all those switches? I need to remove one of those blanking plates to add a new switch.

 

Looks like it just pops out with a trim tool

 

Knowing clip locations always helps me reduce the number of "oh shit" moments where I snap crappy little connectors.

 

I think I got them from pure Tacoma 90148-A0006

edit
https://puretacoma.com/index.php?main_page=product_info&cPath=333_1047&products_id=7786

 

You’re right. I should probably delete all rear facing lights and then no one will run into me.

 

It amazes me how many people on the road already do this through sheer incompetence.

 

Swapped the shift knob today with the TRD Pro knob. Has a really nice feel to it.

 

Trim tool if you have it if not I used a pocket knife just fine…

 

I just slid my very skinny flathead screwdriver along the right side of the panel and carefully tried to pry it out until my fingers could pull and it pops out pretty easy. A pry tool would be the best, but I don’t have one.

 

that is a nice looking knob you got there sir. Should probably replace mine, it’s starting to get worn down and beat up.

On another interior refresher note. Does anyone know if an aftermarket company makes the painted silver pieces for our interior, mine are pretty bad looking after 5 years old. A guy I work with that daily’s his truck and uses it for work purposes has basically no paint left on his trim pieces, hardly any silver left they’re mostly black now. And his truck is a 2018.

 

https://www.amazon.com/EliteTool-Re...ds=automotive+pry+tool&qid=1639081555&sr=8-21

$10 well spent.

 

How did you power them?

 

Prinsu looks so clean. Debating on this or the uptop one

 

What’s the 4a? I’m looking at fox dcc 2.5 coilovers. Doesn’t seem much more to get them through accutune.

 

Which you like better?