Colorado Trading Post

If @Deathbysnusnu happens to come through Boulder tomorrow and we sync up, I'll collect the $ from you upon delivery. Just don't stiff me on the deal

 

No problem. I work till 5ish. I live behind Safeway if you want to meet there. Tower & Hampden - Aurora

 

Canon EF 24-105mm 1:4 L IS USM lens, in amazing shape, no dust or fog in lens, just dont use it as much as i should anymore. The GET OUTDOORS band around the zoom barrel is to stop barrel creep, these lenses are KNOWN to creep when pointed down. slip the band forward and it locks the zoom barrel.

$450

comes with
Lens
Hood
UV Filter
Bag
Front and Rear caps

 

Amazing lens, good luck with sale. Sold all my canon stuff, going to try and jump into the mirrorless game next year.

 

thank you! I loved this lens! just dont use it as much as I should or id keep it

 

what gen? I have the third gen front OEM skids that are moderately used that I would let go for some beers.

 

For a 2nd gen, let me do some research, maybe they will fit.

 

hell i will just give em to you to experiment with. They are not perfect and have some dents and scrapes and I don't have the bolts but they should still work.

 

Sold

 

Cross posted from the BS thread to hopefully get some traction so I can build the leaf pack tonight

Anyone have experience with the Icon RXT leafs?

Debating between Option 2 & 3.

Currently running a topper, sliders, full roof rack and a swing arm with bike rack (which is obviously far behind the axle). Leaning towards Option 3 but worried about a pretty stiff ride

 

I have heard they, both 2 and 3 ride very well.
I almost went with them but opted for Deaver Stage 2. 650 Bilstein springs with 8112/8100 dampers with Mobtown front recovery bar and their sliders, Rago steel LCA skids, aluminum engine/Tran/t-case skids, Snugtop Sport Hiliner shell w/carpet and BedRug, with HiLift inside and a bag of gear. When I had about 200lb inside the bed for work the truck drove Amazingly smooth.
I think you have more weight on your truck and the Option 2 could be too soft when fully loaded.

 

Thanks for the response!

I think without the rack and swing arm it’s an option 2 no brainer, but since those extend so far back I’m a little hesitant.

It’s also cold enough now that I don’t want to have to adjust these in a couple of weeks/months.

Bright side though; I’m constantly hitting my bump stops right now so anything will be an upgrade

 

Ahhhh, outside winter vehicle maintenance! Worse case if you do 3, it is winter so add 6 or more bags of sand!

I remember those miles of slamming the airbags and after a I installed the Badger airbag cradle assemblies, slamming the Wheelers bumps.

 

This might help if you havent seen it. This guy is on option 2 with a cap, skids, sliders, RTT, full rack and a hitch mounted motorcycle. He takes lift measurements as he loads it up. There’s commentary on the ride near the end and in the comments that might help. https://m.youtube.com/watch?v=O1LE_irOmMU

Let us know how it goes I’ll be doing my rxt install in the next couple weeks.

 

SOLD!

Ikea Kitchen table. Really is great condition, just moved and it doesn't fit in our tiny ass house (photo is from our previous house). But hey, I have a garage. Located just north of Longmont.

 

OEM TRD OFFROAD Headlights
In perfect working order. High, low beam and side markers are all led. These also have 3m protective film from the dealer brand new. Came off my 2017 with 18k. Any interest? Located in Glenwood Springs

EDIT - (SOLD)

 

I've got this TRD offroad one with brackets for $40. It's dented and will need hardware but fits fine. I have some stamped ones as well that you can have with it.

 

What are the dimensions?

 

https://www.dimensions.com/element/ikea-slahult-dalshult-table

 

Damn, good find. Thanks!