Ontario BS Thread

I chose Fox because I want a more linear shock, and Icons are digressive. And, I got the front coilovers used from Norilsk.

 

I put some universal fit ones on my Bilstein 5160's in the rear. I mean they are no Fox 2.0 badass mamjama's but you can see what some universals fit like in this short vid.

 

Hey, I saw that His shocks unlike mine been trouble free for over 3-4 years now! (even after my use )


#fvckelka

 

I've only had them for just over 2 years, but yes the are still trouble free. Of course, now that I've said that... Worst case scenario they can be rebuilt, so I was safe buying from @Norilsk.

 

Is anyone on here interested in this?
Brand new warn bumper $800

and i have a new Warn VR evo 10S winch for $600 that will complete the package

 

My interest doesn't coincide with my budget

 

You were blinking

.... . ⸺ ..... / -- .

as you were typing that, weren't you?

https://morsecode.world/american/translator.html

 

It may not have the same asthetic but the notching can be avoided by using square tube for the mounts so it's all straight or straight compound angle cuts.

 

I’m interested

 

So turns out Canadian English is different from the UAssOfA (or maybe I can’t type, I did attach image of what I wanted tho…), anyways still good price for the winch plate, let’s go with blaming Americans since it’s easier.

Got the winch plate as shown below





One piece of 3x5x40 inches of 1/4 angle iron, drill some holes that poorly align because front frame is twisted and nothing is even anymore, a bit of hammering, a bit of tack welding and measuring and bam


Mounts via the stock 3 crash bolts on each side, then on the bottom 17mm welded nut to the frame and bolt. After that, two side brackets bolt down the frame and are holding on each side.

Next step is to add gussets, tow point and burn it in. @tacoma16


Thoughts and critique?

 

Now onto the rear bumper

 

Went for a ride in the ravine after work today.
Fuck you and your 27.5, my 29ers were fine in the snow.

Was definitely fun, but I need some winter gloves.


In the spring we'll fix your brakes

 

Anyone need 4 TRD off road rims? They are wrapped in 245/75/16 nokian rotiiva AT plus E loads. Dunno how much they go for if anyone wants to enlighten me.

 

With some gussets and tie ins as close to the frame bolts as possible it should be sturdy. Get those Tmr gussets. Thinking 4 on the bottom and maybe some on the top?

 

Kijiji would suggest roughly $1000-1500 asking price depending on condition of rim, tread and TPMS sensors.

I’ve been searching for 3rd gen TRD Sport 17’s for a while, but my wallet is too tight to buy anything. I’m considering doing larger OEM calipers and rotors at my next full brake job (2-3 years away ), and they won’t fit behind 16s.

 

i was looking for wheels for a while. Finally found a set of ray10s from a guy on here so now I can do without these rims.

 

Ordered some lights, I want to be able to see on my night time snow adventures. Now that I have a switch bank to put them on, it will be shaweeeeet.

Driving light distribution for my fog area, going to replace the sad ARB fog lights with these.
Flood light distribution for my ditch lights.

Ordered;

2 x Rigid D-SS Pro in Driving
2 x Ridid D-SS Pro in Flood

4 x Amber covers.

https://viewpoint.rigidindustries.c...r-type=multi&hud=off&demo=false&driving=false






Love it when the wife lets me buy my own Christmas gifts.

 

Damn that red is wicked. Favourite 3rd gen colour.

 

You know I still have 4 LED pod lights laying around that I've been trying to give away, right???