What Have You Done To Your 3rd Gen Today?

Gas could be free, I still wouldn’t want to live somewhere with that weather

 

I prefer my snow not be measured by the inch. No, I prefer it be measured in the same manner as these fruit!

 

Totally agree. Just installed mine and it makes such a difference when reversing.

 

Literally just purchased mine. Looking forward (so to speak) to the upcoming results. Eventually I may add the tag-light kill harness, but $7 vs $85 is a sore dick deal.

 

I bought these. They are dang bright in the front but the rear seems dull. Not sure if it’s because it’s recessed or what

 

this could be a good idea to put your valet key and hide it somewhere Katzco Magnetic Key Holder - 3 Pack - 1.25 x 2.75 Inches - Rugged Black Plastic Cases with Strong Magnets - for Safe Compartments, Extra Car Keys, House, and More

$22 3-Pack Magnetic Key Lock Box by Katzco - Hide a Spare Key - 1.25 x 2.75 in Strong Magnet Case for Car, Home, Outdoor Use - Discreet Storage for Emergency Access - Black

https://www.amazon.com/dp/B01AU059KU?_encoding=UTF8

 

I ended up buying a different set on Amazon just a few minutes ago. My LED tag lights were flickering so I put the OEM halogen lights back in and the passenger light burned out and about 20 minutes later the drivers side burned out too.

Here is the

$14 VIPMOTOZ Full LED License Plate Light For 2016-2023 Toyota Tacoma & 2014-2021 Tundra Pickup Truck, 6000K Diamond White, 2-Pieces Tag Lamp Assembly Replacement

link to the lights I just bought

 

I first read that as LED license plate. We have them in California and I've seen a couple.

 

thats sick. Someone will definitely steal that in california

 

Sounds like DMV awarded the contract to https://reviver.com/
So if you want to spend $900-$1000 and be locked into a 48 month contract... The $1k option will track your mileage, have valet mode and vehicle locator. Oh and there is $150 base cost to install for the 12v wired option.

 

Screw that noise. Everything about that noise.

 

Honestly, I'm pretty sure for around $130, you could do the entire floor and roof. The kilmatz cover a lot, i was surprised how little I used.

 

Yea, liberal Cali and its "discouraging" gas prices. Thank god I got the KD Tune @TWTaco and now the Taco loves it some 87 all day long. Fill-up today was $4.99/gal for 87 ($80 for 3/4 of a tank). Welcome to the Bay! hahaha

 

What are you flying? Doesn’t look like a Bell505…

 

I still have the "spots" that show up sometimes on my windshield from suction cups at the factory

 

Installed Craven exhaust today. Not a hard install.

 

TRD exhaust installed today, a step up for the taco.

 

The place that did the install on my UpTop Alpha rack skipped over the part about putting together the handles so I knocked that out tonight. I watched their video and @ClassyTacos video. You couldn’t be more right about those damn safety wires fraying on you!

 

Another Jonathan with an army green taco who installed a TRD exhaust too lol.. what are the chances
Got mine used for $320 with only 10 miles on it. Cut it after the axle and welded on the TRD tip again.

 

Yea, no. I had the oem JBL sub back there, unfortunately, not only does the oem box not work with any decent 8" aftermarket sub, the entire panel makes up the box, so if you take the sub out, you have to remove the panels too. I wasn't about to spend $500+ on the non-jbl plastic back panels just to have to spend another $800 for the custom box that fits in the passenger storage compartment side.

So, I bought this http://www.ground-shaker.com/index....acoma-double-cab-2005-2018&Itemid=104&lang=en and it takes up all the space that was left open after the panels were removed. Carpeting on the box matches the trucks carpet, all i need to do now is trim the top portion of the plastic panels to cover the brace along the lower rear window.

I'll post a pic as soon as I can get one snapped.