Planning to run 265/75/16’s on a 0 offset rim

Planning on running 265/75/16’s on a 0 offset rim. Stock 2019 SR5. I think I’ll be fine without any trimming or cutting. Would love to see pics of your similar setups or advice! Thanks guys

 

I won't be much help but I did find this thread for you.

https://www.tacomaworld.com/threads/post-your-265-75-16s.493583/

 

I have the exact set up. Minimal rubbing on sharp incline/decline. Not enough to trim for me.

 

Should be fine.

 

265/75/16s on stock OR wheels

 

You’ll be fine. Might get minor rub at full lock.

 

This is my current set up:
KMC 717 16x8 +0mm
Mazama Open Range 265/75/R16 in C load



Also only have slight rub on steep incline/decline when at an angle ie. pulling into the drive way too fast.

 

265/75 on SCS F5 0 offsets, no rubbing or trimming.

Wheeling around all day on hard pack iced over ruts, bottomed out a couple times still didn't hear anything rubbing.

 

I think you'll be fine. Possible slight rubbing.

I have Mazama (31.7") 265/70R17s on 5th gen (17") 4runner wheels.
Stock height. They rub slightly under the right conditions.
My sled, the Pavement Princess will not be used off road.

 

Beautiful pic

 

Anymore pics of this?

 

I'm looking at the same tire size combination on a new OR, everything I've seen reads no problem.

 

265/75 ko2’s, stock suspension, OR wheels, factory mudguards, no rubbing during daily driving. Haven’t hit the trails yet…

 

That’s the size I went with. On stock suspension. Nitto ridge grapplers. Haven’t noticed any rubbing at all

 

265/75/16 on stock rims, no rubbing

 

You’ll be fine.

 

Nice to see these. I have 0 offset right now with my 245-75r16 and am thinking I'll upsize to 265/75r16 when these tires are through.

 

265/75/16's on my stock wheels... no problems.

 

This truck is beautiful. AC OR with a BHLM, pro grille, and SS3 fogs? Don't tell me this is also a manual; I've got enough envy as it is.

 

Much appreciated.