Eibach pro lift kit

Agreed. I just rechecked the front shock and its OE spec, which is weird being listed with the lift shocks. But springs and rear shocks appear to be for the lift. The sale price on both are still pretty good.

 

It's interesting that the fronts are listed as 'Close out' . Makes me think something else might coming out to replace them.

 

Yes. I wonder what the change will be and hope it's worth waiting for.

 

I was wrong about the Fronts. They were placed on the page with the Rear Lift Shocks. But after cross referencing the parts number on the Eibach website, those "close out" fronts appear to be Eibach's OE replacement shock.

 

Just finished the install on my 2021. Now the TSS won’t function. Anyone have a fix?

 

Check that you didn’t damage the ABS sensor cable/plug. It’s very easy to stretch.

 

Mine did the same thing after lift. Loosen the 2 side bolts on the TSS sensor then find some small washers to stack on the top bolt to shim it upward a lil bit. I used 4 thin ones between the grill & sensor then slid the bolt back through & tightened everything back up. Haven't seen that warning light since!

 

Yep, hopefully it's just this minor sensor alignment issue! Heard about it more often for people that upgrade to an aftermarket pro grille on a non pro.

 

I agree with this, I have had 3 different lifts on my truck and never had to touch the sensor.

 

The stability system error is on as well. I checked the cables and all look as they did prior

 

Just drove it out in the country on some bumpy roads. Is it normal for this coil over kit to have thumping noise over bumps?

 

Is it like this, https://youtu.be/W4mdGvUJjfY

 

Yep

 

Yep, my truck as well. Infamous taco clunk, this is my video. Just on the left for me. I've checked all bolts twice and everything is torqued to spec. No rubbing from sway bar and spring. It only started after I installed the lift and only on the left side. Gunna check the cab mount bushing, radiator mount bushing, and skid plate next.

 

I havent had any noises at all with mine. Did you toque the lower and upper shock bolts after the truck was on the ground under its own weight? The only thing I could think of is if they were torqued while under droop and when compressing the suspension it pops.

 

I have though that the noise is coming from the top hat area. I only torqued them under droop and not under load. I'll check that as well, thx!

 

Did these noises exist before the suspension was installed? If they didn't then something is moving or preloaded. I would recommend loosening everything you did, and retorque it all to spec with the truck on the ground.

 

Thank you for the suggestion- no, it had no noise prior.

 

Lowest clip setting
1.5” progressive AAL (have 4 wheels in the truck bed so the rake should be a bit more)

 

Looks great! How much lift front and back did you end up with? What size wheels and tires?