What Have You Done To Your 3rd Gen Today?

Sounds like you don't need either, to be honest. I have. A friend with a sport who rock crawls with it and keeps up with ORs and pros. For the beach and fire roads, you'd be fine with a corolla or a sport

 

So in Cali, that would get you about a half tank?

 

Looks great! Any issues, please let me know!

 

I wish the mail would move mine a little faster.

 

I was too
I haven't been on the highway yet but around 60mph it wasn't noticable.

 

Replaced the chrome bumper end caps (I backed into a post protecting a fire hydrant while making a 3 point turn. Who'd have though you should look at the camera and not where your going... but I'm learning) with matte black ones to match the fender flares on my Off-Road. My ride looks much better.

 

Can't be any worse than when I had a 40in lightbar on the roof of my Mazda3.

 

How long have you been waiting??

 

As a child, we had a flagpole. I would go out each morning, unfold the flag and put it up. In the evening I would take it down and fold it properly for storage. If it rained it would come inside.

For me, it is disconcerting to see ragged and torn flags on all manner of trucks, flagpoles, etc. Show respect.

But that is just me.

 

Shipped on the 13th, but it's Christmas season so I totally expect delays.

 

Ah ok, just making sure they didn't get lost or something. If they don't arrive in a reasonable amount of time let me know and I'll get another set sent out

 

Reserved it.

 

Some of the electrical bits are still en route but with a wheelin trip this weekend I’ve temporarily wired my OBA setup and protected it from mud. Then a test last night, fill time from 18psi to 32psi is only 45sec!

Also changed the oil and deleted that pesky sway bar

 

Was never happy with painting the letters. They're curved and humped which makes it unpossible to make it look professional so I Plasti Dipped the whole damned thing.

 

Well, now you have to do the airbox and tube too so that they match.

 

Mine came out great, too!









E
****

 

Thanks for the idea.

 

Over the course of the past couple weeks (mainly due to shipping and stock issues) installed URD ypipes and Borla S-Type cat back exhaust system.

Couldn't get a picture of the ypipes since I did this all with the truck level on the ground. I have the Billie 5100s, so I figured it would give me enough clearance for the install.

I initially installed the ypipes by themselves with the stock exhaust and oh my gosh, the sound was embarrassing. There was definitely a rattle can sound. My fiance said it sounds like the truck was struggling.

The exhaust finally came in and what a Christmas miracle! It sounds like a truck again, and it doesn't drone much or have ANY rattle can noise. Love the Borla system!

 

My first post. Just installed my Eibach pro kit about a month ago and I thought I would share. It's currently on the 2nd perch and I also left in the overload spring.

So far so good. At first it was real choppy but aft 700ish miles its a lot smoother. But a little stiff compared to factory.

I'll try to post more once my new wheels come in today.

 

Did the led headlight upgrade last night and I love these headlights. I did get the pros just bc they were already blacked out although I don’t have a oem pro