What Have You Done To Your 3rd Gen Today?

That’s great what brand are those?

 

3rd Gen- Cheap/easy license plate light glare fix

 

Picked up a nice little recovery kit to keep it the truck. Seems like nice stuff

 

A couple coats for the day

 

Yeah those are clean af!

 

Just added some new Wheels and tires

 

nice first post!

Welcome!

 

Temps shot up one final time before what I suspect is the winter cold temps set-in so I gave it a quick scrub and a quick coat of Chemical Guys sprayable carnuba. I've got Opti-Seal, Jet Seal and V07 layered so another can't hurt. At some point I need to start looking at ceramic, but this will do for now.

IMG_3251 by Mike M, on Flickr

The red is still a polarizing decision. It won't be red next year, but it's fun in the mean time.

IMG_3241 by Mike M, on Flickr
IMG_3253 by Mike M, on Flickr

The fun thing about having a "winter mode" is it's like having two different trucks depending on the time of the year compared to the "normal look" I run the other three seasons.
IMG_3183-edit by Mike M, on Flickr

 

Nice!

 

Wheels, tires, Eibach pro lift and SS3 fogs

 

Quick question: how hard would these be to remove? If my bulbs burn out, this would be blocking the way to replace them from the lens side. When I put the current bulbs in, I tried to get in from behind but it was impossible for my hand size. Thanks in advance.

 

they are held on by double sided 3M tape. I haven't had the need/desire to remove mine so i can't say. I'll defer to @sphinxbccp

 

What did it cost ?, looks like a quality exhaust

 

You could probably just pry them off with a putty knife, maybe add a bit of heat to it. After they are off, you should be able to scrape the tape off and hit it with some GooGone. Apply some new tape and back on they go.

All hypothetical, I haven't actually done this. Yet, anyway, since I'm still thinking about upgrading the lights themselves after I apply the pieces. Even if I destroy them taking them off (unlikely, but possible), I'd only be out 7 bucks.

 

like 600

 

As others have said, should be a simple as lightly prying them up with heat if needed. However, I have always got to the bulbs from the rear, it's way faster/ easier to me.

 

Wheels received. Honestly wasn't expecting them to be here so soon and I intended to wait till next month to buy tires....but I'm inpatient so the truck is at the tire shop now.



Merry Christmas to me!

 

SOLD! Just ordered a set!

 

I'll be sending out the next batch tomorrow, thanks! If for some reason you have issues with them if/ when you have to change your bulbs just hit me up and I'll take care of you