Clicking Noise coming from passenger glove or door, please help

https://youtube.com/shorts/LLowl3cNk7Y?feature=share

 

didn't hear any;thing

 

I corrected the video try hearing it now

 

Is there anything in the glovebox? I know it seems like a stupid question, but I had a similar issue and it was just a pen light bumping around in the glove box.

 

I’ve had noise from the plastic door in the back of the glove box that gains access to the cabin air filter. I added sticky felt to it to quiet it down.

 

While I didnt hear anything in your video, take a sock and push it between the passenger side tweeter grill and the windshield. They are a problem area for noises.

 

I took everything out of glove box an checked the cabin air filter and the area between tweeeter and windshield, none of that is causing this. Its so loud and concistent im fucking going insane and i have to drive across the country in a week

 

https://youtube.com/shorts/LLowl3cNk7Y?feature=share

if the video played with sound then youll hear it, and did what you said didnt help though.

 

hmmm, if its not that part then you might need to have someone else drive while you root around in the front to find the noise.

 

I heard it. You have to turn your sound way up. You have anything installed back there?

 

Only thing is aftermarket fogs i have some racks installed but the noise predates the racks. I rattled the fogs trying to recreate the noise with no luck

 

I have a similar noise in my truck. I think it has something to do with the passenger side speaker grille rubbing against the A-pillar plastic cover. Mine's intermittent, but annoying nevertheless.

 

Possibly a loose screw thats rattling.

 

i have somthing inbetween the speaker and a fram, not making a difference

 

Hey so i played the video on my desktop and counldnt hear the sound, but on my iphone hear it clear as day, not sure why thats happening with this video.

 

That doesn’t sound like the A-pillar/speaker rattle. I think something else is going on there. I could be wrong and I hope I am. Wish I could be more help.

 

That sounds more like the engine splash guard rattle on my 4Runner. The plastic clips that secured the rubbery engine splash guards in the wheel wells loosened up and sounded very much like that. It took much searching by many people until someone finally traced it to the wheel wells. It sounded like it was coming from the dash. I was able to recreate the squeak by wiggling the splash guard. I fixed mine with Gorilla tape, others bought new clips or used double sided tape between the rubber guard and the frame, to tighten things up. I don’t recall hearing of this issue on the Tacomas but it might be worth a look. Here’s a pic from the 4Runner forum.

 

I had a hood hinge bolt make that noise, replaced it diag. is rag putting pressure on hood for road-test