The SR thread, let's see them!

My 2021 Barcelona Red Tacoma SR on King 2.5s and 16x8 Method 304

 

Nice looking lift wheel/tire combo. Post more pics!!!
Bro, be careful with that license plate on the front dash. If you get in an accident it could fly through the cabin and hurt someone.

 

Thanks man! I’m taking a trip Joshua tree and big bear next week, I’m hoping to get nice pictures there! And yea I actually just got a ticket for the license plate so I took it off lol

 

does anyone know if adding 1.25” wheel spacers on stock sr5 wheels with 275/75/16 tires would rub?

 

I have 265/75/16 General Grabber ATX, no lift, no rubbing, no cutting needed. There is a post on here re: largest size tires without lifting, rubbing and cutting and this is the size .

 

gotta say she did just fine, cab and bed packed full. MPG dropped to 16 and endless downshifting but it as happy with how she did.

 

Most likely... you might get away with 265s

 

Strong chance, especially with the space increasing the arc the wheel takes when turning, combined with the wider tire. All but a guarantee you'll rub.

 

sorry, I meant 265*

 

I have an sr with the 16x7 wheel and 265/70r16 toyo at tire and when the tire is turned all the way, I have one once from the fender liner.

 

Anyone here switched to a set of oem trd pro taillights ? If so are they plug and play prolly a dumb question but just curious before purchasing a set hahaha

 

Yes. Plug and play

 

I have 16x8 -25 offset 265/75/16 and even after massaging fender liners I still scrub radius rub in reverse at 2/3 to 3/4 turn on the front drivers side with a passenger in the cab mount area is tight but clears. With a little number crunching and an offset calculator you can compare your current wheel offset with the additional 1.25" spacers and get an idea of how close to -25mm you are. The aggressiveness of the tread also comes into play as well. I have wildpeak at3w. If I had a milder at tire I probably wouldn't rub at all.

With an 8" wide rim, I'd say -20 mm offset would clear. If you get up above (or down below depending how you look at it)-25mm offset the chances of scrub radius rubbing with an aggressive tread pattern will be highly likely.

Now if the rim is 7" wide then these numbers are out the door and you could probably get away with a bit more poke without rubbing. I did a lot of number crunching when buying wheels cuz I didn't want to rub. I wanted plain 5 spokes, very lightweight, a finish that wasn't black, 16x 8", and some poke. I wound up with scs f5s -25mm I really was looking for something with -19mm offset, but I couldn't find anything.

If you take my specs 16x8 -25mm (3.5 backspace) knowing I have very minor rubbing and use an online offset comparison tool vs the setup you are looking at you can get a pretty good idea of your clearance.

 

Are you talking about the LED or halogen Pro lights? If LED, I think you need an additional aftermarket harness.

If you're getting the halogens, where are you getting them from? I'd love to find these but Toyota parts stores are still selling them for a lot.

 

It's been awhile since I posted a pic of my SR Utility, did some hunting on the farm this morning.

 

Baby, it's cold outside.

 

testing out the new Kenda Klever AT2

 

Got the Tyger soft shell roll up bed cover for Christmas from the wife this year. So far so good, we'll see how it holds up.

 

Once my wildpeak atw3s wear out I'm getting a set of these..

 

Few things I’ve done:
20% tint all around
Kicker tweeters
Arm rest cover
Rek Gen flaps
Matte gray TRD wheels in falken 265/70s
Bed lights
Black chrome OEM exhaust tip