Wiring questions (I know… I’m sorry)

So I’ve had these lights wired up with the stock circle red on off switch that came with GG lighting kit. I have this rago push button oem style switch that I want to install. My question is which wires would go to which? I do not have a relay if that helps?

 

found this forum thread which similar but the baja harness is white, black, blue as mine is red, red, red/black


https://****************/2021/03/08...to-factory-style-push-switch-5th-gen-4runner/

 

Do you still have the original switch and it's wiring diagram?

 

I don't have the wiring diagram unfortunately. the original switch is just the circular red on/off switch it just dangles in the openly

 

not this exact one but just like it

 

black: ground
green: connect to a fuse with ignition, will light up when you turn key on. Or I opted for a live wire all the time, so i can turn my lights on when truck isn't on.
red 1: connect to the relay that connects to the accessory your using
red 2: connected to fuse with ignition, will light up when you turn key on (can also connect this to green)

 

why is the black connect with red? id use a test light to see which wires does what

 

the problem with that set up is you're running straight to the battery...that switch can burn up without relay. I would either opt to buy a new harness which is like $10 or make your own, which will run about $10 too

 

Do you recall which of those three wires was connected to which pin on the previous switch?

 

That depends on what the lights are. Low amp LEDs don't necessarily need a relay.

 

do you have a link to one you suggest

 

Use a test light...ones gonna be on all the time, ones gonna be on when you turn on the key, and ones ground

 

from left to right :
bottom
middle
top

 

I just ordered those type of push buttons and they all had warning labels on it about relays

 

lights are 20w flood light pods

 

194028952027

 

my bottom lights when i have key in ignition and top lights with accessory lights up when i dont have a key in

 

ideally, i'd like to have it that way.
is the harness you suggested what you used ?