New Taco, suggestions for towing and rear sag?

Yeah man, no problem at all I wish you well in your towing extravaganzas!
It’s definitely a balance of ride quality and capability.

 

https://www.huskytow.com/husky-towing-center-line-ts
specifically
https://www.huskytow.com/husky-towing-32215-weight-distribution-hitch

 

I had air bags on my super duty, absolutely loved them. I'm not sure that experience translates all that well to the Tacoma, though.

 

Hellwig EZ-990 helper springs is what I use, 2000lb rated, easy install and remove if desired. About $220
With a good wdh

 

Thanks, I’ll take a look at it!

 

Do you notice any difference in the ride when you’re unloaded? Seems like the Hellwigs might be a good way to go.

 

Ride still good, if adjusted properly they need load to be effective

 

I read about pinning the trans cooler on 3rd gens, I didn’t realize that changed for the newer ones. I will definitely look at my options for monitoring trans temps, thanks!

 

Awesome, thanks!

 

OP I sent you a PM.

 

This is the route I plan on going.

 

I wanted to help with towing so I started with airbags, then new struts, new leaf springs, re-geared to 5:29, and even WD hitch. Each thing has helped make the towing better. Saving for a supercharger next.

 

Personally, I would absolutely get a WD hitch with an anti-sway bar. Rear sag is not the only issue.

 

Lol, maybe I should just start with the supercharger!

 

You have fine taste in trucks, so I think I’m going to take your advice. I think our trucks are twins except I have the predator tubes.

 

@wiljayhi

Thank you for the info regarding Hellwig helper springs. Any noise from these, when not loaded?

 

Neither the helper spring nor the leafs make any noise whether loaded or not. (Maybe I got lucky?).

 

Thank you...

 

Your welcome.

 

I’ve been looking at the RAS, how much squat does it take out on your Tacoma? Seems like it could be a pretty good solution.