Getting a Toytec lift… tire suggestions??

No worries, that’s what this forum is for. The Ray10’s are 16”x8”. They have 4” of backspacing & -12mm offset.

I did an Eibach suspension lift at the same time I got my new wheels and tires, so I did my alignment once everything was installed.

 

Thank you, so much! Yes, Eibach Stage 1 on the first clip. Did a 1.5” MaxTrac block in the rear. I have a couple pics that might help you:

 

Thank you so much @IrishRed . I so much appreciate it. So is that backspacing and offset that you have only for that specific wheel brand? Or can I do the same with another brand of wheel with the same settings? Also, no rubbing no cmc yeah? You think I could do that with the stock UCAs prior to me getting the lift or should I wait? I got the SPCs going on as well

 

i have the Toytec Alum 2.5 front and rear. The front coilover comes set at 2 inches, but it’s adjustable up to 3 inches. I haven’t adjusted mine yet. I’m running Nitto grappler mud terrain 285/75 with stock wheels. You will need to remove the front mud flaps. No rubbing and I still didn’t raise it to the max height yet.

 

Pretty cool ride you got there.

 

No problem. Glad to help. As for wheels, you’ll just have to shop around and find something that strikes your fancy. Any 16” x 8” wheel with the correct bolt pattern and 0 to -12mm offset should work and give you the look you’re after. Different companies offer different styles/models with varying specs.

I chose the Ray10s because I love the look of them and they’re hub centric, but they can be difficult to find. I have no rubbing with my setup and I even have mudguards and no CMC. You’ll be fine with your stock UCA’s

I have JBA UCA’s that I’m going to be installing soon, but not because of rubbing. My goal with the UCA’s is to regain the caster I lost with my lift and improve my tracking at highway speeds.

 

Thank you. It’s certainly not winning any creativity awards, but it makes me smile and performs like I had hoped. Best vehicle I’ve ever had.

 

That’s all it matters. That’s where we all going for.

 

@IrishRed you are awesome!! Thank you so much! I tried to look for those Ray10s as soon as I saw your post and you are right. Very hard to find. So for now, I’ll probably look for the same settings on a different wheel. Thank you so much for your time!

 

Don’t mention it. I’m just paying it forward after all the help this forum has given to me. You can always try Freeman Toyota. They will ship directly to you and sometimes have them in stock. Look ‘em up & give them a shout. You may get lucky!

 

Call Freeman, I just ordered 5 of the black Ray 10 17"... shipping Monday

 

If you don’t mind me asking what was the total price? And how much was shipping alone?

 

5 x $255 = $1275
$45 for lugs
$1320 Total
+ $250 Shipping
$1570 all in