Magnuson Supercharger Mega Thread for 16+ Tacoma - Unboxing, Install DIY, Dyno Video

I'm still waiting on the Revel AFR gauge to be delivered. But RSG just called and said the Maggy SC has a shipping notification! Schedule for installation in 2.5 weeks. Now I just need Yotawerks to release their tune!

 

We're currently hoping to find someone with a wideband AFR and hopefully a boost gauge too, who lives in a warmer climate (minimum daytime 50°F, preferably 60+), in order to expand our test group some more, further the progress to the finish line, and confirm progress that has been made on the current testers, who all live in cold climate

 

Hoping the wideband will get here in time so both gauges can be installed with the super charger. Happy to help when the weather gets warmer here in the greater Denver area.

 

Is there anyone in the SoCal area, once the YotaWerx tune comes out, that would be able to update me from 04b31 to whatever the most up to date is for my 19 off-road?

 

I know a couple guys out there, wouldn't be a problem to reach out to them and ask them to take care of it for you.

 

Awesome! Who are they?

 

@Kevinpd325 is one of them. There's another guy out there too but I don't know his TW handle, just his name on FB.

 

Appreciate it! What’s his FB? Trying to see who is closer lol

 

I'll pm you. Incidentally, both of them messaged me to say they saw these comments lol

 

Just for clarification and searched a few threads, but is this sufficient to add boost monitoring down the road? Original plug from magnuson did remove without damage

 

Yup, I did the same. But I recommend going ahead and putting a barb on the 90* fitting and run a vacuum line out to the fender or somewhere around the brake master. Then plug that line. That way you don't have to squeeze your hand back there once it's installed. Will make hooking the line up later literally effortless.

 

The invoices help a lot
Document what you have
Makes life easier for everyone involved

 

I bought stated value policies to ensure this wouldn’t happen

 

Is there anyone that is super charged that has tried to update their ECU : 04b31 to 33 for example that has had issues possibly? Having issues on my end up dating mine

 

Issues with what? Techstream?

 

That, and even trying to flash even the main tune from Magnuson on VFTuner won’t take now. But On Techstream it reads I have 31 but the cuw file greys out the 33 update and fails the flash . Interestingly on the line above it has selected the 7200 file that I believe is for the manual?

 

Does the truck start?

Did either a flash or the cuw update ever start and then fail?

 

Truck starts and runs like normal and yes it would attempt to start but never get off the ground that makes sense and in? Would show up and say that the ECU was in able to be read

 

It goes through the 10 second timer prior to start I hit start and never makes it past the point Before the error

 

I drove down today to meet up with @TWTaco And he encountered the same thing