1st Gen Lunchtable Thread - General Discussion

Show me.

 

Well I’m not gonna go take mine off and apart

 

Well then I'm in limbo cuz now I've heard both and ofc the manufacturer pics suck

 

https://www.ebay.com/itm/TRQ-2pc-Metal-Exterior-Door-Handle-Kit-LH-RH-Sides-for-95-04-Toyota-Tacoma-Truck-/234178714711

Steel all the way up through here.

 

Well I've seen that but you're sure its solid all the way through the handle?
@se7enine I might owe you an apology

 

100%

 

My local dealer is insane on the parts markup. Might be worth the time I save though at times.

 

Alrighty then, guess it's back on my wish list lol

 

If they aren’t what you want when you find em lemme know and I’ll buy them

 

Do you need OEM from Marlin? I picked up a bunch of hub studs, cone washers, and flat washers from a Yota parts place on eBay last time I was in a pinch and I think I had them in 2~ days. They were aftermarket but I haven't ripped the hub off with 35s and the ARB so there's that

 

So it seems the hub studs listed on eBay couldn’t get here until the 15th of January or later. At this point I might as well order them there. OEM is finally discontinued with the rise of popularity with 4WD/manual hub swaps.

 

Do land cruiser studs fit, they're still an open part in multiple countries

 

I think the solid axle ones are way longer. I have a set from a solid axle truck and they won’t fit.

 

What about ones from pre tacos and runners with manual hubs

 

Interesting, I thought I have ordered and used LC ones but maybe I got lucky. Are you sure they are hub studs and not third member studs?

Even the third studs should be able to work if the short side is short enough tho, all 8mm studs

 

Looking up the third member studs and IFS hub studs. As far as I know these are solid axle studs. Got them from Trail Gear.

 

@Kwikvette https://www.instagram.com/p/CYU_0OwleL0/

 

Oh yeah those prob won't work if they're not threaded all the way like factory

The third studs are the same as the hub studs, 8mm and same length as the hub studs on one side and threaded all the way to the middle ring just longer on the other account for the added thickness of the third member housing. If you like I can dig through my shop later and find my box of spares to check

 

Those aren't for mounting the hubs that's for sure, I have nothing like those. I have ones like them for mounting the kingpins

 

Oh fuck, yes depending on the dia those might be for the steering arms. Especially with a wide shoulder between the threaded portions

TG does make a hub stud kit tho.

This is the LC stud I ordered https://www.ebay.com/itm/Stud-Cone-...nd-Cruiser-FJ-FZJ-BJ-HJ-HDJ-HZJ-/282057442258