1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Hyper Flash after new turn signal connector

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Mattsyota529, Jan 13, 2022.

  1. Jan 13, 2022 at 5:41 PM
    #1
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    Hello everyone. I recently replaced both front turn signal connectors on my truck as they needed replacing. The truck comes stock with 2 wires and I read that you can buy the 3 wire connector and if you only wire in 2, it works. Well, the fix worked. Only problem is now I have hyper flash all the time. On stock bulbs and leds it will hyper flash. Anyone have this issue or fix? Anyone know where I can get the 2 wire connector? Anyway to permanently disable hyper flash from the relay? I can't seem to find anything.

    Edit: got the problem fixed. Ended up going to a salvage yard and found 2 connectors off 2 Toyota Corollas. Took the connectors and replaced the aftermarket 3 wire connectors with the oem 2 wire connectors on the Corollas and now it works perfectly. Only hyper flashes with leds only. Thank you to everyone who helped me out! I learn so much in this forum.
     
    Last edited: Jan 14, 2022
    TRDguyKC likes this.
  2. Jan 13, 2022 at 7:21 PM
    #2
    TRDguyKC

    TRDguyKC Well-Known Member

    Joined:
    Sep 18, 2008
    Member:
    #9316
    Messages:
    1,259
    Gender:
    Male
    First Name:
    Kris
    Sierra Vista, AZ
    I used two of these (one on each side of the truck) when I installed my LED signals in my ARB bumper. I was getting the hyper flash and the way to fix it is with resistors. Easy fix and surprisingly inexpensive.

    50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED https://www.amazon.com/dp/B07S6N2HMT?_encoding=UTF8
     
  3. Jan 13, 2022 at 7:53 PM
    #3
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner

    I replaced the actual connector where the bulb goes into the socket. Not the bulb. It's hyperflashing with regular bulbs. Maybe not enough resistance?
     
  4. Jan 13, 2022 at 7:58 PM
    #4
    Dm93

    Dm93 Test Don't Guess

    Joined:
    Mar 3, 2015
    Member:
    #150066
    Messages:
    8,997
    Gender:
    Male
    Texas
    Vehicle:
    2014 DC OR 6spd 4x4
    Predator tube steps, Ranch Hand grill guard, Magnaflow CatBack exhaust, Toyota tool box & bed mat, 2LO Module by @Up2NoGood, Rearview Compass/Temp Mirror, Tune by @JustDSM.
    Do you have it wired to the correct 2 pins on the connector?
     
    TnShooter likes this.
  5. Jan 14, 2022 at 4:36 AM
    #5
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    Yes I believe so. Ground to ground and power to power and the third wire is disabled.
     
  6. Jan 14, 2022 at 5:03 AM
    #6
    Too Stroked

    Too Stroked Well-Known Member

    Joined:
    Jan 24, 2017
    Member:
    #208501
    Messages:
    3,704
    Gender:
    Male
    First Name:
    Tom
    South shore of Lake Ontario
    Vehicle:
    2021 4Runner SR5 Premium
    A 2009 Tacoma uses a 4157 bulb for the front turn signal. If I'm not mistaken, that's a dual filament bulb which means you should have two positive leads (one for each filament), plus one ground. Since you're missing one hot lead, that might explain the hyperflash. You should not need resistors for the stock bulbs, only the LEDs.
     
  7. Jan 14, 2022 at 5:59 AM
    #7
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    So the connector should be fine, maybe it's just not a dual filament bulb socket then? I'm not currently on the oem sockets but I'll see if that makes a difference.
     
  8. Jan 14, 2022 at 6:30 AM
    #8
    MadRussian

    MadRussian Well-Known Member

    Joined:
    May 23, 2018
    Member:
    #254362
    Messages:
    360
    Gender:
    Male
    Metrowest MA
    Vehicle:
    2010 TRD OR AC
    It's a dual filament bulb but one of the hot leads is blanked out in the connector. You can either add the resistor, replace the blinker relay with one for LEDs, or take apart the blinker relay and file down a particular piece of metal that acts as a resister. I did the filing version and it worked, there is tutorial around, I'll try to find it.
    You can also connect the blank to the corner marker light for a simple DRL mod.

    https://www.tacomaworld.com/threads/05-drl-daytime-running-lights-install-oem.1475/
    My mod is on pg 29.
     
    Last edited: Jan 14, 2022
  9. Jan 14, 2022 at 6:40 AM
    #9
    maineah

    maineah Well-Known Member

    Joined:
    Mar 24, 2011
    Member:
    #53641
    Messages:
    6,585
    Gender:
    Male
    First Name:
    Tim
    Maine
    Vehicle:
    4X4 SR5 V6 6spd
    One side of the bulb is day time running lights the other is turn signal with a shared ground you are missing a load on one filament.
     
  10. Jan 14, 2022 at 7:11 AM
    #10
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner

    Sorry if I'm not understanding. So the 3 wire connector is missing a load or is it the socket missing a load? And if it's the connector thats missing the load, I'd have to splice in a resistor or get an led flasher relay correct? The truck has day running lights stock. Sorry for the confusion.
     
  11. Jan 14, 2022 at 7:32 AM
    #11
    MadRussian

    MadRussian Well-Known Member

    Joined:
    May 23, 2018
    Member:
    #254362
    Messages:
    360
    Gender:
    Male
    Metrowest MA
    Vehicle:
    2010 TRD OR AC
    I added the black wire. The hole in the plug (red arrow) had a blank rubber plug.

    upload_2022-1-14_10-31-44.jpg
     

    Attached Files:

  12. Jan 14, 2022 at 7:32 AM
    #12
    Dm93

    Dm93 Test Don't Guess

    Joined:
    Mar 3, 2015
    Member:
    #150066
    Messages:
    8,997
    Gender:
    Male
    Texas
    Vehicle:
    2014 DC OR 6spd 4x4
    Predator tube steps, Ranch Hand grill guard, Magnaflow CatBack exhaust, Toyota tool box & bed mat, 2LO Module by @Up2NoGood, Rearview Compass/Temp Mirror, Tune by @JustDSM.
    I think I'd swap the wire on that connector and see if it solves your issue.
     
  13. Jan 14, 2022 at 9:21 AM
    #13
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    I think I'm just gonna have to find a wrecked 09 and just take those connectors. For now I'll just ride with the hyper flash. That's gonna get annoying quickly.
     
  14. Jan 14, 2022 at 9:32 AM
    #14
    MadRussian

    MadRussian Well-Known Member

    Joined:
    May 23, 2018
    Member:
    #254362
    Messages:
    360
    Gender:
    Male
    Metrowest MA
    Vehicle:
    2010 TRD OR AC
    Somewhere in the stickies there is a chart of all the connector and numbers, I'm sure these connectors are used in other Toyota models and you can get replacements on ebay/Amazon/etc.
    Finding a wrecked tacoma at a junk yard is surprisingly hard.
     
    This site contains affiliate links for which the site may be compensated.
    #14
  15. Jan 14, 2022 at 9:34 AM
    #15
    totmacher

    totmacher automotive hypochondriac

    Joined:
    Sep 7, 2009
    Member:
    #22430
    Messages:
    4,657
    Gender:
    Male
    First Name:
    Daniel
    TN (memphis-ish)
    Vehicle:
    4Runner, Tundra
    Cut & broke off some stuff.
    If using dual filament bulb, one filament operates on less power so it is dimmer than other filament. If you are sending power for turn signal to the low pwr filament, it will hyper flash. Turn signal need to be on the higher power filament.
    Swap your power with the blank to power the alternate filament and see if it flashes correctly.

    My 05 Tacoma had a 3 pin socket but on 2 wires. I added a 3rd wire to make the low power filament come on with parking lights.
     
  16. Jan 14, 2022 at 9:40 AM
    #16
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    Ju

    Found q wrecked 05 Prerunner in a junkyard and I'm gonna check it out. Anyone know if the wiring is the same for the drl and stuff or if the 05 has drug? I'd hate to take the time and do it just to have the same results.
     
    This site contains affiliate links for which the site may be compensated.
    #16
  17. Jan 14, 2022 at 9:43 AM
    #17
    MadRussian

    MadRussian Well-Known Member

    Joined:
    May 23, 2018
    Member:
    #254362
    Messages:
    360
    Gender:
    Male
    Metrowest MA
    Vehicle:
    2010 TRD OR AC
    Last edited: Jan 14, 2022
  18. Jan 14, 2022 at 1:14 PM
    #18
    Mattsyota529

    Mattsyota529 [OP] Active Member

    Joined:
    Jul 19, 2021
    Member:
    #371724
    Messages:
    39
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    2009 Tacoma Prerunner
    Yeah I called like 15 salvage yards asking for 99-15 Tacos and only 1 had an 05. But it was completely stripped. I ended up taking 2 off of 2 corollas with the same plug and wires so I'm hoping these will work
     
  19. Jan 16, 2022 at 2:37 PM
    #19
    maineah

    maineah Well-Known Member

    Joined:
    Mar 24, 2011
    Member:
    #53641
    Messages:
    6,585
    Gender:
    Male
    First Name:
    Tim
    Maine
    Vehicle:
    4X4 SR5 V6 6spd
    One big issue I can tell you about is resistor grounding it has to have a good ground that means a bright shiny resistor ground yeah through the paint it is the key to a hyper flash. I kind of lost track but your purple wire needs to be tied into your resistor. The Toyota setup is a bit strange it uses the inactive wire as a ground as a resistor that is why it works with only two wires.
     

Products Discussed in

To Top