Bilistein 6112 question

Does anyone know why it says not to use clip #6 #5 on the bilistein 6112 coilover for the ac cab?

 

Lift will be too high and it will cause problems with your cv boots and joint

 

Due to the lighter weight it would go beyond their 2" maximum designed lift.

 

Truck is lighter

 

ah i see thanks guys!

 

Will #5 #4 setting clear my 285 70 17s? Says 1.65 of lift?

 

You will be chopping and trimming. IMO stick with 16x8 wheel with a 265/75/16 it will look good. It will off road well.I’m set on 6/5 with 600lb coils have some armor also. Lift settled maybe have a little under 2” but I don’t care. Running 265/75/16 on 16x8 still looks good. Off-roads great. Also a DD No complaints here.

 

Ride height doesn't help with the rubbing.

They are conservative with the #'s It will likely be 2" over stock.

285's expect rubbing unless careful alignment with aftermarket arms.

Cab mount chops are pretty common and many shops do it now.

 

Send it to #6! Don't let anyone tell you not to mess up your own truck!

 

Right now im on 285 70 17 on 2" coil spacer lify with 0 rubbing. Im hoping the small drop wont make a difference. I have been running that setup for 130k miles