Tacoma bilstein 6112 5160 lift

Off-road at least once or twice a month.

 

Do you have a front view of this? Looks great

 

I just put the same setup on my truck this weekend. I have a DCLB TRDOR and about 400 lbs of added weight from the BAMF sliders and skid plate trilogy. Can you tell me your hub to fender measurements in the front and rear? With the 6112 set at 5/4 I seem to have only raised the front about 1" and was expecting a bit more. maybe all of the added weight from the skids? I may need stiffer springs, or to raise the clips to 6/5. I will probable leave it for now as it rides great, and I'll figure out what to change once I add the weight of a front bumper and winch later this year.

 

My measurements are with 32’s 22 1/4” front and rear about 23 3/8” With my added RCI SLIDERS AND ARMOR lost about 3/8” or 1/4” of lift. I’m in same boat ride is awesome might eventually order 650 coils if and when I decide for front bumper what are your measurements hub to fender or ground to fender?

 

Yeah I'm at 21" front both sides, and 24" in the rear with the RXT on stage 2. I forgot to get a pre lift measurement but stock is supposed to be around 21" and some long bed owners report 20.5" stock. Even if I was at 20.5" stock that means at 5/4 it only lifted the truck 0.5" I checked the part numbers and they are correct. I was hoping to be around 22.5" in the front, which is still another 1.5". Maybe I order the 650 lb springs and reassemble the 6112s at 6/5, or 6/6 and 1/4" spacer on the driver side. The rear is exactly where I expected it to be.

 

I hear you bro. I did order 650 coils still not sure what I want to do , I have about 1” and .25” rake which like. 650 coils give about 1/2” lift extra if you don’t already know. IMO think I might wait till I decide about front bumper then bump up springs. I really like the ride even more now with armor honestly don’t want to mess that up. LOL!!

 

I don’t rub on the cab mount with 285/75r16 KO2 and wheel pretty hard.

These trucks aren’t all built exactly the same. Some trucks will rub and some won’t. Just depends.

2.8” lift in the front, 2.5” lift in the rear with -10 offset wheels.