Timbren U-Bolt Flip Kit

The SES and active bump screw into the same setup so there wouldn’t be anything wrong with that!

 

I bought the Timbren front and rear SES bump stops without the flip kit, but now I'm thinking I want to do the u bolt flip. What are my options?

 

Hop onto to our website and chat with one of our reps. They should be able to help you out mate!

 

I have a 6" BDS lift with full leaf pack in the rear, want to remove the bump stop setup the PO installed. what measurements/photos do you need to determine what setup would be best ?

 

I could definitely use a 9" bolt! Any update on when you'll have them?

 

Quick question. Should I trim down the u-bolts? Seems like a there’s a lot above the bolt. Running stock leafs with Icon add-a-leaf.

Thanks!

 

I would trim those down. It looks like you wouldnt gain the full potential of the second or lower part of the bump stop and the U-bolt would make contact with the frame.

 

Thank you, sir! Came to that realization last night as well. Will bust out the angle grinder.

 

Dont cut them flush with the locking nut. Just trim to the top of the cup

 

Did you cut the bolts to make them shorter? I have the same leafs on my 2nd gen and my ubolts are way longer.

 

What leaf pack do you have? I just got Deaver Stage IIs and trying to figure out how long of a UBolt I need..

 

I have the Deaver stage 3's in the picture.

 

I'm considering this. When putting in my info, I'm being asked if I have a 3 leaf or 4 leaf OEM suspension. My truck is a '23 and had 3 leafs + overload but now has 3 leafs + progressive 3 AAL and no overload.

What is recommended here? Thanks