What Have You Done To Your 3rd Gen Today?

I couldn’t think of a good plastic scraper and that piece of jade was giving me the eye. Gonna have to get a scraper on Amazon I don’t think they are in the auto stores here

 

It might end up in the bay next to my old wedding ring

 

ive always got a ski scraper in the truck in case i forgot the other one

 

Is that a chicken feeder on the left?

 

Cheap plastic putty knife from the hardware store works for frost, full on ice not so much

 

Took mine to the pawn shop.

 

It's some junk that was "rescued" from a piece of terrifying playground equipment being demolished in the 90s.

Similar to this, but he had Mickey Mouse gloves on his hands.

 

Some sort of woody&pinochio&hot dog combo in there too

 

Is that in pdx?

 

Ohio, back in the day.

That specific photo I don't know, it's a quick Google result used as example.

I'll guess not PDX though, as you can see the unflattering Native American swing frame right and that probably wouldn't fly in the woke NW.

Although Portland did have an incredibly racist "**** Chicken Inn" for a while, so....

 

Absolutely. The clarity bumps up and my thought is better adhesion of any coating… similar to coating paint, you get better/longer results if the paint is prepped properly (clay and polished etc) so why wouldn’t the same apply. That’s the reason ceramic coating is so expensive, it’s all in the prep work needed for the best results and why the warranty is so long.

I most recently did my rsi canopy rear window because there were multiple ghost stickers that would only show up when wet (window was completely clean of adhesive by goo gone/alcohol/razor/clay bar) and some kind of mark that wouldn’t go away with simpler/traditional methods. I used a 5” da and started off with the least aggressive pad/polish pad (something I picked up YouTubing) and worked my way up until I was happy and went back up to a polish pad. I ended up getting the results I wanted with a heavy cutting pad. It removed the ghost stickers and whatever that mark/line was. And this was on a new window. Not sure how bad of a scratch you could pull being glass but with the right product and a da/pad you can make it the best it’s going to be or ever been (again depending on scratch obviously).

Your hand won’t give nearly the same results and the effort required will be discouraging. I have a harbor freight da with lake country 5”backing plate and pads. I bought the stuff at the rag company (because they have frequent deals and great customer service). I buy my microfiber from there too. I just bought a 3” backing plate and pads that I would of rather used on the small window. It’s a matte paint so this was my tape job with the bigger pad. A picture wouldnt pick up the before/after but in person is where it counts

 

Oooh. That’ll take up way less space in the glove box than the normal scraper.

 

I’ve seen those before… i think we had them at some playground where I grew up in upstate ny. In the 80’s. I Don’t miss those years.

 

Picture reminds me of the time I ran over a can of white spray paint in my black Sequoia. Made a mess of the back door. Me and a buddy backed the ass end into the garage, taped everything and repainted it. He's a former auto painter so he knew what he was doing. Turned out perfect. We left the paint dots on the license plate and part of the plastic bumper as a reminder of the 2 cases of beer that disappeared that day.

 

You know what they say… beer and paint don’t mix

 

Yea, there's not too much that beer does mix with but we managed to gitter done anyway.

 

This is possibly beyond my level of attention. But after I keep looking at it for a week…. Those rsi stickers, I had one at some point, peeled the stickers with a razor and the dust or whatever would bring it back out.

 

I read glitter done. And I thought of something that mixes well with beer

 

NERD!