Moog UCA Ball Joints & Magnaflow Overland exhaust/catback

New Moog Upper Control Arm Ball joints For Sale. $40 for pair. Please see photos for info & description! I purchased these because I was told they fit our Toyota 5 lug… NOT… grrr


Feeler for a Magnaflow 19585 Overland Exhaust / Cat-back System is Sold…

 

Any interest in selling just the muffler portion, without the section behind the axle? I'd be picking up.
Also, what's the measurement for the overall height of the muffler + resonator section? I have an air tank above my Flowmaster.

 

My test-fitting would require cutting, as I welded all my joints.
If you could get me a measurement, I could compare that to my space.

Any idea the decibel comparison to a Flowmaster Super50?

 

any chance to ship the exhaust to 29483? will pay for shipping obviously, let me know

 

Awesome. So right around 25x10x8 or so. I think that will work. I'll crawl under with a tape later today and see how things look, it sounds reasonably good for my application. Thanks.

As you can tell, I'm pretty interested in the setup, without the last section behind the axle.

 

Gentlemen I’m getting guys coming out of the woodwork on this system so please bear with me I’m answering PM’s as fast as I can. And I need to take the tip down to PPE to have the tip welded back on. It will only be about 1/8” shorter than it was before and turned down will be turn down a little more. Before it was kind of pointed at the rear spring hanger to much for my liking. So unless you can’t tell I’m a bit Anal about exhaust systems. PPE also has a big supply of box’s and one of those foam machines for packaging exhaust as this is what they do for a living. Here’s a photo of there work! Enlarge & enjoy! And yes they are…