Post your 1st gen REGULAR CAB tacoma

Im new to owning Tacos - and trying to find out how high I should lift mine. I love the height on yours - mind sharing what you have suspension wise? Also, Beautiful truck!

 

A bit older, but was just surfing and saw your set up. It looks incredible. Will I need to cut fenders and use an aftermarket bumper to use 35's?

 

...search button.. ⬆️

 

It all depends on how much you lift it. This truck has no lift whatsoever but he tubbed the cab to fit the 35’s.

 

thank you - will start research with that

and copy - i think i have a 3" lift currently? but I found a BTTF light bar that I installed and now I can't help but notice that I need either a higher lift and/or bigger tires.
Im still very new to owning trucks, so trying my best to find out what the best approach would be and how so thanks for all the help.

Here is mine so far.

Before:

Now with BTTF light bars:

 

Beautiful RC's

 

What kind of wheels and tires are you running? I would like to replace mine I just don't know what certain sizes will look like.

 

99 with 209,6xx on the tach

 

Which light bar is that....I'm searching for the same for mine.

 

Its a Dual Single version, One piece exactly like what was on Marty's Black Toyota truck in the movie.
Not sure if its smittybilt or what, but I looked for a good 6-8 months for a decent priced one.
Got it for $300 +
the nuts and bolts another $40-$50 +
2 steel-it cans after polishing away the surface rust ($60)

Someone in the forums suggested to have some stainless steel cut sheets that can match the bottom of each leg,
wc you can then sandwich on the underside of the bed but I bought ones that were too thick and I had a hardtime drilling through it.
No SS plates on this one, but its pretty solid and wont move. Just remember that its not a roll bar (im sure someone here will say it lol)

here is what they look like when i first brought em home.





Hope this helps!

 

2000 2.7L 140K

https://photos.app.goo.gl/MQ2Pyof8dF5AM1qJ9

 

Here’s my summer project pops gave me his absolute 100% original mint condition 1999 Tacoma with 67,000 kilometers on it has not seen snow in 20 years garage kept used to take household garbage to the landfill site once a week.

 

Since this thread popped up guess I should update.

 

as of last week.

 

This past October

 

Newer member here but long time lurker ha. Learned a ton from these forums. Anyways here's mine. Will be adding coastal off-road bumpers, probably sliders at some point. Have JBA UCAs and 882s that I need to install...Just need time. Any questions about mine feel free to ask.

 

anyone here got dakars with the aal? I put them on my truck yesterday and the ride is super bouncy. I have 500lbs in the bed thats always ther. Was told to remove the 3rd leaf from the top down. Was just looking for any help, thanks!

 

@YotaGangYotaGang i do currently. I have a top plus about 500lbs of concrete to help mine settle. If they're brand new they'll be stiff and pry give a ton of rake like they did for me. I have 5100s plus OME DAKAR CS018R with aal's. Had them in a few months at this point. Give it time.

Edit: haven't removed any leaves either