What have you done to your Tacoma today? 1st Gen Edition

My single cab is buckets.

 

The planted brackets are much nicer and well thought out than the ones from mastercraft. I'd switch if I did em again. The MasterCraft seats use the same generic bolt spacing as other seat brands

 

Now I'm on the same page here


I thought you were just referring to the MasterCraft stationary bracket.

I've never heard of the planted brackets before now

 

Of all the people to post photos of dildos on the daily thread, I have to say that I didn’t expect it to be you.

 

Buckets in my single cab, did not have a bench originally,

Corbeau makes sliders that fit perfectly,
They have a dual track and a single track,
They slide back and forth, adjustable

 

Did a little work to my truck over the weekend. Bought new headlight housing, parking lights and blinker lights(haven’t put blinkers in, waiting on new lower valence) then bought the HID projector retrofit kit from the retrofit source and installed them. What a difference it made! I questioned if my lights were on all the time but these things look great and are super bright.
Also bought a new Sony headunit, kicker component speakers, back up camera and sound deadening material. I removed the entire interior of the truck and installed 2 layers on floor and roof then did the inner and outer skins of the doors. The truck seems so much quieter and it sure is nice having a backup camera and Apple car play. Didn’t take many pictures of either unfortunately.

 

You can swap in an intermittent stalk out of a 97-01 Camry or one from a 98-03 4runner. Easy plug and play.

 

How is the leg room with your setup? Did you lose any space? My old back sure can use proper seats. Mine are in great shape but they were not good when new IMO.

 

I had 4Runner seats before,
4Runner seats are fat and wide and no support.
The Corbeau seats are thinner and sit lower, so you get 2” extra head room and a little more leg room.
These fold forwards too,
They hug you tight but more stiff ride

 

Doesn't the 4Runner stalk have a rear wiper control on it?

 

Probably, I used one from a junkyard Camry.

 

Loosing height on the seat is something I want to avoid. I'm not a tall man and I like seeing over the hood

 

Not a bad problem to have, adding height is usually pretty easy.

 

Any trouble accessing the temp control dials… can you tilt the display?

 

I was running an Integra Recaro in my taco, but feel like it was a little bit low...ended up trading it for a pair of Evo 9 Recaros and love it. Definitely sits a little higher.

 

Here's the driver side.

 

Here's how both seats look.

 

I'm using planted brackets paired with Recaro sliders.

Initially because my truck had the 60/40 bench, I thought I needed the bench seat brackets, but as I said earlier, learn from my mistake and get the "bucket seat" version.

 

You can add spacers to adjust to your needs,

 

it wasn't the dan army is getting destroyed by the dan army