Procharger and Paparee

Just got my procharger installed too, feels a LOT better than stock!

 

@cruisinAllDay808 Glad to hear you got your kit installed! As far as difficulty, where would you scale this on a 1-10 scale? Would it be something I would be able to do over the course of a weekend with basic auto tools? what were some of the biggest obstacles with your install? I have a kit on the way myself and would like to do this myself.

 

Biggest pain is adding the crank pulley and belt. That was accomplished with just a Milwaukee 3/8 electric impact. I was able to do the entire install in my driveway with a set of hand tools.

 

Hey so I installed the procharger on my own with basic hand tools, just need to fully torque the balancer bolt to 205 per install guide. Did you have to readjust your belt after about 100 miles from it stretching? If so how in the world do I do that?

 

I didn’t see any adjustments on the bracket. But it is using a auto belt tensioner so I don’t think you need to worry too much. I’m about 7k on the charger and haven’t seen or felt any belt slip or boost drop.

 

I appreciate it. Also could you at some point pm me so that I can see a picture of how your boost a pump wires are set up? I think I did mine correctly but the led has not turned on or at least not during idle. Maybe it turns on when under throttle or when it needs to boost the fuel but obviously i’m driving and can’t see what’s under my seat when i do that. If you could PM me or send pics of the wire setup at the fuel control module plug in and the boost a pump itself that would be helpful. Thanks again

 

Did you ever get your dyno done?

 

I’m about to get one and i’ve got the procharger and cat delete and some other stuff too, this friday or saturday actually. D3 Performance is doing a dyno tune in may for me luckily I live 4 hours from them in the houston area

 

No, sadly. I wanted too but the dyno shop here doesn’t want to put the truck on the dyno for some reason.

 

hey voodoo i got one mats from ov charger kits mine if share instructions you got from procharger want see if some stuff match

 

What are you thinking?

 

Some pictures sent me not really clear alot stuff bolts up same place want see little more detail

 

On the bracket portion of the supercharger?

 

Nice! Looks like I know what to spend my spring bonus money on.

 

yea around that area an pullys

 

The instructions should be the same. Can’t find my instruction sheet at the moment. But the lengths of the threaded rods are different. And make sure you have a tape measure on hand so you can measure the amount of threads sticking out past the stock brackets.

 

Ok...I've seen a couple of Tacos with FI and they are either in a field or slow crawling on a trail...Any on the street or 0-60 runs...Did I misss those.

 

Allright if find it send message me probably give u my number text me. Thanks!

 

I’m going to be posting some here in a week or two but i’m fully catless and don’t have extra weight as i’m making mine a street sleeper. I have some pulls but no times right now. She’s in the shop and gonna be looked at on tuesday cause the alignment of the belt is off so it keeps slipping. The boost a pump isn’t working either so gotta figure that out but oh well. I’ll message you once i do a dyno a pull

 

How did you go full cat-less without throwing CEL? I am wanting to possibly do the same. I have a similar setup to you and I am sort of doing for a sleeper thing myself but URD or anyone else doesn't sell those o2 sim's anymore. Later on wanting to get a Supercharger ( preferring Procharger ) and some other goods