What Have You Done To Your 3rd Gen Today?

looks great!! I went the lazy way and left the grille and emblem on. Using a flat panel tool I was able to get the vinyl tucked around the lip of the emblem enough and then used an exacto knife to cut the extra.

 

Yeah, I could tell that the vinyl I had was adhering enough that would probably have worked for me but my OCD gets the best of me

 

you took your time. It shows.

 

Brutal

 

I have these and they are definitely harder plastic. I've already cracked one with the customer service was pretty good and sent me replacement very quickly. Lifetime warranty dot-dot.

 

I have the TufSkinz on my truck and so far they're great! They are made of Kydex the same material that they make gun holsters out of. Very light weight and durable.

 

Odd that yours cracked? Was it cold when it cracked? Kydex is normally strong and somewhat pliable more likely to bend then crack under normal conditions. Glad to hear TufSkinz have good customer service! It is a bit expensive to begin with. IMHO.

 

I saw this on the highway this morning XD

 

Looks a little crooked

 

Switched out my grille with an x-trek and a tss sensor relocation bracket from AJT

 

Arrived today. (ordered yesterday). Can't beat that....if it's the right one. I have not opened the box yet.

 

Different….. and crooked…..but definitely different.

 

Did you have to get it re calibrated?

 

I asked about that at the dealer once and they looked at me like I had two heads and said that wasn't a thing.

Was that true? Dunno... but I felt dumb for asking after that.

 

So dealers charge for non things?

 

I mean... yeah

In this specific case? F*ckifiknow.

 

I had to copy this. I used silver to blend in as little better during the day. It's 1" tape cut to length with the corners rounded off.

 

Replaced my front body mount bushings on my 2018 with 37000 miles. Used the Energy Suspension bushing kit. Dealer told me that an updated part was for 2019 models and newer. I walked away empty handed. The driver side bushing was cut through and I had to use a pry bar to get new one to align. Passenger side aligned ok and installed in literally 5 minutes. Spent 45 min. on driver side.



No more front end noise.

 

New cbi roof rack height bed rack

My rago bed rack is for sale