SOLD: Softopper and Rack for 5' bed, Northwest Arkansas

Black Softopper and rack for short bed, both purchased spring of 2020 and truck is garage kept. It's been well used, not abused. I love this set up but my needs are changing and I'm replacing this with an Alu-Cab canopy.

The rack was fabricated locally, as you can see in the last pic it requires bed caps cut for the OEM trifold cover. I had it designed this way to save some space on the load rails. If your caps aren't (or you don't want to) cut I'd be willing to swap caps if this sells before my new topper gets here. The rack sits very close to the top of the softopper, about 1/2" lower than the typical Prinsu style rack. Not a biggie with smaller tents, and there's a few easy work arounds for longer tents. I ran a 72" CVT on it I post pics of below. As you can see from the pics the crossbars could use a little touch up paint.

The topper comes with a total of 6 clamps (4 are standard) and is in great shape with the exception of a very small slice in the front panel. I installed a 3rd break light and will include the wiring and @Puppypunter excellent splice less brake light harness.

I'd be willing to separate but the rack would have to sell first.
Topper/rack $1,000
I'll throw in the very well used ARB awning for an additional $100
Located in Rogers, Arkansas

Thanks @ColoradoTJ for giving me a pass posting FS with the parts still on the truck.

 

Here's how a 72" tent sits directly on the crossbars. When I added a Martin rack I made spacers for the tent's mounting rails using Unistrut and longer bolts.

 

Love that setup. GLWS

 

Gave the truck a wash yesterday and figured it'd be a good time to remove the rack and topper. Id be happy to sell these separately if the rack goes first which I'd take $600 or (again that's for the rack without the topper)

 

I’d be willing to cut the bed caps but what do these bolts bolt into? Requires drilling? I don’t understand from the pics.

 

There are threaded holes for the OEM tonneau cover hardware behind the bedrail caps on 3rd gens, the rack will only fit 2016+ short beds.

 

Just for clarification this is where the rack attaches, there's a total of 6 M6 threaded inserts a side. They are there for the OEM tonneau cover pins. I had it made this way to save some space on the deck rails.

 

Gotcha thx for explanation. I am 2nd gen so no go for me

 

Nice items.

Just curious if you were using all 6 clamps? Or using 4 and have 2 as extras?

 

Yeah, it helps the softopper side rails sit a little flatter...but they still angle in a little over time.

 

Hump day bump. I've got a growing list of dudes in line for the topper if somebody would take the rack off my hands.

 

SOLD to a nice MTB bro from Kentucky. Dang it looks sweet on that green Taco.