33x12.5 on 4Runner 17s

Thinking about running 33x12.5 on 4Runner stock 17s, anybody else doing this, or should I stick with 285/70. Not really wanting to run spacers

 

Imo I wouldn’t run a 12.50 or a 285 on any wheel less than 8” wide. Plus more than likely you’ll have uca clearance issue with the factory wheel and offset.

 

The 4Runner SEMAS I have are +4 offset compared to the +25 on the OEM Sport wheels the truck came with, so they actually fit a bit better and don't hit the coil springs like the Sports did.

Hopefully 285s aren't a problem because I'm switching to 285/75R17 in a couple months.

 

What’s the width?

 

Not sure the width
but they’re 2014 trd off road 16” wheels

 

The 4Runner sema wheel?

 

From what I found it looks like they’re a 7” wide wheel which imo is to narrow for either tire. Backspace will be fine.

 

Wait, I thought we were talking about 4Runner 17s?

Yes they are 17x7. I'm currently running a 35x10.5 (~265 equivalent) without a problem. 285s are ~11.25" so I figured it wouldn't be an issue, but I guess at some point it has to max out.

 

Yes. 285s are rated for a 7.5-9.5 “ wheel. The sweet spot is imo 8-8.5”.

 

Welp... not cool, now I've gotta find different tires.

 

Are ya lifted?

 

4R TRD OR wheels are 7.5" wide

 

Yes with OME BP51 kit, Dakar leafs, and a cab mount relocate.

But it sounds like wheel width is the limiting factor here?

 

7" wide





7.5" wide

 

7" wide

 

https://www.tacomaworld.com/threads/gen-2-4runner-trail-wheel-pix-info-thread.542459/

 

Seriously why can’t Toyota just make an 8” wheel. That’s a good looking wheel. They make replicas that are 8” wide, you could sell those and get the reps unless your set on OE wheels.

 

Only due to spending ENTIRELY too much turning them white...



But if push comes to shove, I'll bite the bullet.

 

Noooooo!!! Why?????!!!!!

 

Because they look siiiick bro.

I don't wanna take this thread off topic with my nonsense though, OP started it with a specific question and I wanna be respectful.