1st Gen Lunchtable Thread - General Discussion

Whyd I have to get the 3.58 anomaly

 

Hack-a-thon brother, hack-a-thon

 

Because why not

 

For the lulz

 

Whoremoans ?

 

Tell me why I grabbed a beer at first

Bottle of water every morning

 

When I went to Spaldings to get my Tundra front CVs and my Sequoia rear axle they had tons of parts for all models stacked up in back, but they're high foot traffic and I'd suspect they don't post everything. They grade parts mostly based on looks which on a front differential isn't really a great metric... so I bet they don't even take the time to post B and C stock. I bought C grade rear axle... was everything for $220. My Tundra OEM CVs were also from C grade and they were $35 a piece. I'd just call them.

 

It was... I'm looking for at least 2 trucks this summer. I save you a diff tube.

 

I have one spare diff tube. Original plan was to replace the vacuum actuated tube that I’m locking with a set screw. It’s a cleaner solution than a hose clamp but most diffs aren’t vacuum actuated if I’m not mistaken.

 

95.5-00 vacuum

01-04 electric

I had other parts I can't remember. That's why I asked the other day if his truck had really been converted or not as those parts were 4x4 swap components.

 

Found several door handles the other day in storage too.

A new Tacoma handle (dorman), a chrome Tacoma handle (used OEM), and an old, throw away Tacoma handle.

 

Ah it’s off a 96 4Runner so that makes sense. There’s an Allen plug screwed into a hole that lines up perfectly with the fork in the locked position. So I unscrewed that cap and threaded a set screw in with red loctite.

I’ll buy the chrome if it’s for the driver side.

 

cant be legit need to get off marketplace lolol

 

Even if legit, 10 weeks old = long gone.

 

is it worth a call to check or that axle dookie? Itd be worth getting it to dump in storage if so

 

I wouldn't waste any money on a semi float D60

 

thx brotha, always wise as ever

 

Just pay shipping; I'll visit my storage after work today.

 

@Kwikvette

You have keyless entry in the 80 series?