Alabama thread!

Just need to trim up rear. I’ve got to trim bumper as well as flare so I’m gonna wait until next week probably. Just don’t have the time this week. But I’m happy with how front looks!almost looks level but the rear is almost an inch higher. The flare trimming plays a huge eye trick.

 

Nice Land Rover

 

Mornin fellas

 

I had never seen a 130 in person.

 

so ive got a delima lol. Tires are speced at 34.7 tall that puts them roughly 1.6 inches taller than my 33's. The kumho were speced at 33.1. I measured last night and the top of my box is 1.1 inches from the trim piece on garage. If i removed the trim piece i would gain another 1/2 inch. Whats the over under it fits without removing the trim piece. lol. Taking bets.

Thats just to get through door, it fits fine once inside.

 

lol, ill most likely have to take boxes off and make some sort of quick release for them so i can take them on and off when i go on trips.

 

Divide that number by 2. Overall diameter is 1.6” taller but you’re only raising the trucks height by the radius of .8”

TLDR; no more garage dilemma

 

sweet so should have a little room and i would assume the 34.7 is at max psi or speced psi which i run my tires lower on street.

 

Ideally…. My crap is TIGHT too so I understand the struggle

 

Dude that literally is how mine looks lol. I thought that was my truck for a second it looks so close like that with mine. That little flap touches my plano box.

 

Need to only count half of the 1.6, they will only raise the truck .8

 

Yep it was close but it fit.

 

Very happy with it! Tires ride awesome. Only thing is my Passover tire the wheel weight is slightly touching brake caliper. Gonna swap tires around.

 

Everything clears barley. Def gonna have to adjust alignment for Offroad!

Driver

passenger

 

I would be so paranoid about that

 

Hammer time

How close does it get at full lock?

 

That’s at full lock. It rubs when in reverse like that. Ibe got another 2* of caster in spc I can adjust and I haven’t maxed my lowers either. I think it will be ok once I align it and then I will go from there

 

Here’s with tire straight

 

It looks really good