What have you done to your Tacoma today? 1st Gen Edition

Yeah LT is Light Truck category, not a rating. You can get them in C, D, E, etc....at least that's my understanding of it

 

LT tires can be both C or E, it depends on the load rating of the tire. You just need to look a bit closer somewhere else on the tire for the Load rating. It's usually the number, or letter in this case, after the size.

 

Tossed a battery in the white truck. Let them both run for a while.

 

Yeah I’ve only ever seen those in fords. Not sure if that’s a feature that is easily added. Don’t get me wrong I loved it when I had it in the rental car I had

 

Sorry but I’m not getting any traction on my thread and thought maybe someone here could help. I got a p0340 code on my 3.4 and it turned off twice while driving it, got home shut it off. Turned it on and let it idle and I hear this noisehttps://youtube.com/shorts/6AWcPAj-_qQ?feature=share maybe someone here can help. Thx

 

P0340 is for the camshaft position sensor malfunction. It lives behind the timing belt cover at the front of the engine (plastic part that says 3400 on it).

 

Yeah I read the code and it said the sensor but when im looking at it im trying to figuire out where the piece connects from end to end. I took this pic, idk if that blue male plug is the cam sensor cus i have an ohm reader but idk how to test it

 

Remove the cover. Like I said, it's behind it.

 

Thank you, ill do it tomorrow

 

Let’s talk wheels! Besides scs, are there other good options for something with 3.5” bs.

 

I know you said besides SCS but these are in stock right now 16x8 3.5” bs -25mm offset
Matte jet black

 

Voltage thingymabob

 

Alright back on the ground... Time to get some shocks in this thing.

 

I should say something witty here about uptravel and making sure you have some when you're done, but it'll be the third time you've done it, so I don't need to. Right?

 

6th... Now watch as I pull a rabbit out of my ass and stuff 12-in shocks under the bed.

 

So no up travel is your specialty?

 

I measured, there's plenty of room. If these were 2.5s I'm not sure it would be doable though. How's that clutch treating you

 

Like shit. I've given up. It slips..nothing to do about it right now.

 

I can’t remember, have you got the sequoia axle under there already? Or going to do something temporary with the stock axle and shocks under the bed?

 

I'm just getting them under there temporarily, it won't be the most ideal setup. But it will work until I can outboard them. With the move coming up I don't think I want to tear it apart again just yet. I'll wait till I'm in the new shop to start throwing long travel parts at it.