Show your 285/75/16 and 285/70/17

I don't remember if it was a 285 but someone on here is running some sort of 33" tire on stock suspension. He has a build thread on here

 

I have a buddy running 285 on stock TRD OR, good around town but rub on ay off roading and backing up at angle.

 

We don't get snow in Oklahoma often! Took the quads out and had a blast in it!

285/75/16 Nittos

 

I never did a CMC and I have the same set up with zero offset. Just banged on the liner and cut the black plastic on the back of the front tires and a leveling kit. No rubbing unless I really try to make it rub at full lock in reverse and even then I usually need to hit a bump. The spacers help.

 

I’m on an all stock pro and run 285s. No rubbing in town or wheeling.

 

285 75 16's but I am going to go with 285 70 17 with stock TRD PRO black wheels so these will be for sale March 1.

 

Where do you reside? I'm interested

 

Im in Lakewood, Ca (right by Long Beach). I have 1" Bora spacers behind those too that I will be removing.

 

285/70/17

 

I really like your camper shell. How much weight are the racks above the shell rated at?

 

Thanks! I’m not sure on the exact weight. They are only Thules. I really only use them to mount surfboards. The full prinsu all the way back may be a better option if you need it to support more.

 

Im seriously considering buying a set of 285 75 16 for my next set of tires. Hoping to make work without a CMC. May take the gamble. Im on Eibach stage 1, and AAL+ OL in rear. Rims are 16x8 O offset.

 

The CMC thing isn't a big deal, its like an hour at a good 4x4 shop and you won't even know they cut anything if they are any good.

 

fingers crossed ill get lucky and wont need that. I havent ordered the tires yet, but maybe this spring/summer I will... this is just future plans for me.

 

Recently had my 285/70r17 Maxxis RAZR ATs mounted to my Ray 10s after installing my new suspension. Loving this setup so far!

 

I believe only Pro's can run 285's all stock. Some have minor rubbing and some don't.

 

any rub on a 2" lift w the 285's..

 

I had mild rub on the lower control arm at full lock. Then I put a the 1" bora spacer and it would rub just slightly on the inner part of the flare so I just had to trim 1" off of the plastic flare at the bottom. Not even noticeable the way I did it. I can take pictures of what I did if you like. Now I dont have any rubbing on or off-road.

 

How much off set do these TRD rims give the tires?

 

If im not mistaken the TRD wheels are a +7 offset.. spacers are a must if you want that aggressive stance