Factory invertor button light up?

Nah this is a legit annoyance for many people. Toyota went and made all but a few switches in the truck light up.... Some switches have indicators to tell you they are on, others dont. I feel like toyota just grabbed a handful of switches and threw them in these trucks.

 

Yea... Just seems a little cheesy.

 

You should just swap the leds in those aftermarket switches to ice blue. Just need some basic soldering skills and some leds.

Treedix 750pcs 3mm LED Light Emitting Diode 15 Colors x 50Pcs LED Lamp Assortment Set Kit

Treedix 750pcs 3mm LED Light Emitting Diode 15 Colors x 50Pcs LED Lamp Assortment Set Kit White/Warm White/Cold White/Red/Green/Blue/Ice Blue/Yellow/Pink/Purple/Multi Color Fast Flashing

https://www.amazon.com/dp/B0819GCHDC?_encoding=UTF8

 

The OEM switches do seem awfully random... some lit, some not, different fonts used, and completely random placement.

 

I solder everything in my wiring but I've never soldered anything on a board, maybe I should give it a try

 

What you also need is an LED jumper harness from Kyle Morgan (member here).

https://www.tacomaworld.com/threads...nation-harnesses.697269/page-12#post-25802706

 

True, since your adding lights to a switch that doesnt have lights.

 

The solution is to get more lights do you don’t notice that one so much.

 

I talked to him about the jumpers, I will definitely be purchasing them for my next switches. I had already finished everytime by the time I found them.
"I like lights", he said, in the "I like turtles" voice.