What Have You Done To Your 3rd Gen Today?

Time for a steel bumper

 

Thanks. That will be my next mod.

 

Given that I wasn't in the car, I'm assuming she might have be going somewhere around 20-25. But you are right, the senior gal was probably texting and driving.

 

Not at all . It’s just vinyl over original emblem.

 

Which brand brackets did you use that had this issue?

I just picked up a set from CaliRaised because they look great and seem useful, but now I'm worried about actually installing them.

 

Trail bronze grill

 

Where did you purchaser your TRD Pro grille from?

 

You can order from any dealer but I used
https://parts.lagrangetoyota.com/
Lagrange Toyota

 

Just did a rear seat delete with a platform for my dogs, I also added a ramp that hangs on the latches the previously held the seat backs. I still have a little finish work to do but it’s coming along. I will be adding a “barricade” that does not allow the pups access into the front seat.

 

I had the CaliRaised.
If you mount something small they should be fine.
These whip antenna's are sturdy/stiff and causes the mount to twist while offroading.

 

I bet you he is an Iron Maiden fan!

 

.

That's the first gloss one of those I've seen. I like that a lot. Is that from the guy on Instagram?

 

Up the Irons.....

 

Is it built that tall to allow for extra storage and cubby/lid access?

A ramp is a great idea, a few people on here have mentioned dogs getting injured leaving the back seat or even jumping off the tailgate.

 

https://www.hypnotic-designz.com/

 

I always worried about their paws/legs falling through the slides of my old 4Runner and FJ. I was constantly lifting them in and trying to help them out. They are trained/conditioned to get down to the floor before egress but it always made me nervous.

 

Just scheduled my apt for new gears with ECGS for the new 35s

 

I used tint film on mine, basically the same thing, and got no errors. I don't actually use mine though.

 

Pinned the engine at 7250 rpm for about 10 minutes (stock redline is 6000). Interesting how much heat comes through the vents. Outside temp was about -4F.

 

Diamond Back HD is 115 lbs
Apogee Bumper is 105 lbs

Subtract anything you are replacing.

I have a lift with +200 lbs added capacity in front and back. so even with both I am higher than stock (actually have a .75 inch rake which I want to get rid of). I didn't expect the OEM bumper and hitch to weight 80 lbs!

If you already have the DB HD - put another 25-30 lbs in the bed and see if it sags?