What Have You Done To Your 3rd Gen Today?

My victory panels came with the spacers as well. 1/4-3/8 gap between the panel and console after mounting

 

Ahhhh....Cletus the slack-jawed Yokel! He's my hero!

 

What bed side molle panels are those? They don’t appear to mounted to the interior bed rail or are they??

 

150lbs ? Please enlighten us. (No pun intended…..maybe a little).

 

Just use the prop rod. Problem solved.

 

those are also victory 4x4 side rails. They use brackets that utilize the bed rail screws but retain access to the rails. They also have a cutout for the bed light (not pictured)

 

Ok what are these beautiful wheels?

 

Not the OP but those look like Fifteen52’s.

 

My tailgate latch broke, and I have a hard tonneau cover that was locked. Forum said coat hanger wouldn’t work. Mine did. Was Able to unlock cover latch.

 

Added oil drain valve and catch can.

 

Aerial atom

 

I am not seeing those bed rails on their website…got a link?

 

I meant not having the prop rod would be lovely

 

Thought you meant the struts…..was thinking there’d be twice as much in your way.

 

Maybe not quite 150, but switching to carbon would pull 30 out of the hood, 10 or 15 out of each fender, and 40 out of the bumper, while switching to TE37's would pull out another 25lbs. So maybe around 115-125lbs.

 

Got tired of seeing the gear select plastic scratched up and got a different shift knob

 

Is that just a sticker?

 

Who can afford that? The fuel savings would be negligible at best. I would rather add more weight in the form of armor to help this beast achieve its full potential. Just sayin’.

 

Tinted the front emblem today. Had to take the whole grille off because of the little cinch washers. Came out great though got a bunch of extra wrap I don’t need but we’ll worth the 14 bucks. used Vivid air tint Matte black from Amazon. It almost perfectly matches the magnetic grey. Stuck it dry as smooth as possible, heated and pulled around the side then cut it so it was still wrapped around a little. There’s a small lip you can follow so the edges are concealed when you put it back in. Hardest part was those cinch washers. Needle nose worked good. Also for anyone wondering the emblem is solid plastic I have no idea how the sensor works but I imagine you could put duct tape on it and it wouldn’t mess with the sensor.

 

I forgot the name but there’s a guy on Instagram that makes shifters with bike handle type grips. They’re pretty sick if I had a manual ide get one.