What Have You Done To Your 3rd Gen Today?

I did the kicker upgrade today. I had the tweeters and put them everywhere else today. It’s a huge upgrade. My only thing. Could you get the bottom corner of the door panel near the speakers back flush? Mines out a little bc the kickers are bigger

 

Installed new Bushwacker Flares today. I also installed a back rail and maxtrax mount. The flares were pretty straight forward to install. I had to trim a bit to get them to sit flush. The clip on the front was a bit of a puzzle. I ended up using large channel locks to push it into place

 

I wouldn't mind getting a light weight hood with the same super white just to keep all the panels the same but still wrapping it, just to protect from scratches and chips.

 

I have the exact problem. I played with it for a while. The door needs slightly more force to close, but not to the point where I feel the panel will be damaged.

 

Take those grills off...you don't need em.

 

I finally got rid of the chrome vent rings - I was pretty distracted by their reflection in the window.

 

Poke mon vibe

 

Today I removed the stock leaf pack with the Icon AAL and installed Deaver U402 Stage 2 leaf springs. Got some rake back and the ride is great.

 

Can’t wait to get out, first trip is mid April through GW forest to blue ridge on way down to Florida.

 

Good Deal, Thanks for the info!

 

My work surface is a piece of Sunboard off of eBay (0.5" X 12" X 48" Black UV Resistant HDPE, $32). It's attached with 3M Mounting Tape ($15 plastic Velcro) on every other rib of the tailgate liner. If you only use a couple of strips (like I did at first), when you brake it flies off into the bed. Something about Newton's Laws.

 

Nothing wrong with DIY. Many of my mods are and some I have shared in the BST thread.
Gar-Fab does ship to the US at a very reasonable cost.

 

thanks for the link I will be placing an order. Wonder if they would do a GB

 

Simple yet major upgrade!!

 

While I don't like the adversarial color choice, I do appreciate the reasons behind it. I think more people should consider semi-gloss, satin, and flat paint jobs/vinyl.

 

I looked online and most of the other colors were sold out but the 3m glossy red was just about everywhere if anything it was only 42$ and its easy to take off. With the help of a friend or two and a heat gun it goes on pretty easy.

 

Put together a dedicated set of snow tires this week, and was able to get them on today. Pro rims, Blizzak DM-V2s, and cloned sensors. It was a good day to test them out as well, huge difference! Now I just need to find an overlay or different center cap to get rid of the red TRD.
I’m guessing it’s wear and age (15k miles), but the Pirellis were sliding all around this winter, seemed way worse than last winter. Must have wore the points off of my 3 peak mountain snowflake.
Also did Tufskinz mud flaps, and pulled out my DDI seat jackers and replaced with just MMP brackets. I like the multi mount panel, but the seat jackers didn’t change much for me.

 

Yeah, I got mine prettied up for a road trip and gas is close to 4 bucks. Driving the wife's Corolla everywhere right now to save gas.

 

Well, putting one in a Prius would be stupid!

 

Today I put white paint on the pointer/arrow of the climate control knobs and painted the other parts that look like pointers black….I always look at them and think WTF were they thinking…I know I am far sighted but still it’s confusing for the visually challenged…