What Have You Done To Your 3rd Gen Today?

It's all good.

 

Switched parking spots with my wrx

 

Why red tho??? I'm getting a spare parts vibe.

 

I chose the worst time in human history to install a supercharger in an already inefficient vehicle. ffs.

 

No reason, really the dash bezel is red and my jeep is red, just felt like the new dd needed more red.

 

That’s different! Sure you are starting a new must have mod on here.

 

Ordered some AMP steps so shorties can get in my whip, lol. Though with a seemingly "nationwide backorder" I have doubts the eBay seller who stated they had stock, will actually fulfill the order. Fingers crossed...

 

Yessir, that's one I'm still needing too.

 

Right on man. There was a guy on here with a white hood who replaced it with a matte black one and was gonna paint it white to match. Looked really cool the way it was.

 

I did the kicker upgrade today. I had the tweeters and put them everywhere else today. It’s a huge upgrade. My only thing. Could you get the bottom corner of the door panel near the speakers back flush? Mines out a little bc the kickers are bigger

 

Installed new Bushwacker Flares today. I also installed a back rail and maxtrax mount. The flares were pretty straight forward to install. I had to trim a bit to get them to sit flush. The clip on the front was a bit of a puzzle. I ended up using large channel locks to push it into place

 

I wouldn't mind getting a light weight hood with the same super white just to keep all the panels the same but still wrapping it, just to protect from scratches and chips.

 

I have the exact problem. I played with it for a while. The door needs slightly more force to close, but not to the point where I feel the panel will be damaged.

 

Take those grills off...you don't need em.

 

I finally got rid of the chrome vent rings - I was pretty distracted by their reflection in the window.

 

Poke mon vibe

 

Today I removed the stock leaf pack with the Icon AAL and installed Deaver U402 Stage 2 leaf springs. Got some rake back and the ride is great.

 

Can’t wait to get out, first trip is mid April through GW forest to blue ridge on way down to Florida.

 

Good Deal, Thanks for the info!

 

My work surface is a piece of Sunboard off of eBay (0.5" X 12" X 48" Black UV Resistant HDPE, $32). It's attached with 3M Mounting Tape ($15 plastic Velcro) on every other rib of the tailgate liner. If you only use a couple of strips (like I did at first), when you brake it flies off into the bed. Something about Newton's Laws.