TRD Pro & TX Baja OFFICIAL Thread...

@JasonLee is and will be our "driver" to bring the wheels from Steamboat to the "city" for us. He and I have an arrangement to get @nickonfire700 and my wheel to Salida where I will ship to Nick.

 

Sweet, thanks!

 

And thanks @Squeaky Penguin this is a huge win for me. I have the 6 piston calipers up front, and the factory spare does not fit with those. So if I were to get a flat in the front atm, I'd have to move a rear wheel to the front, then spare on the rear lol

 

16” wheels fit over your 6-piston brakes? Mine require 17” wheels.

 

With our rims, Yup! It's extra offset. stop-tech 6 piston fits. But you have to keep the standard 16" TRD rotor. To run larger rotors you need 17"

 

Ah, I’ve got the BIG rotors.

 

Also gotta be careful with the wheel balancers. Too far in and they will rub the caliper lol

 

Interestingly Awesome!

 

Also, the bigger rotor is really like half the total upgrade, especially where you're at. That extra heat soak helps a ton! But down here in the city, just having the upgraded calipers have been more than enough . Bought the rear disc conversion (before I realized we have the electronic master cylinder i.e not upgradeable) and decided a rebuilt rear drum set was all I needed

 

I have rear wildwood calipers. Just need to do a reset with a scan tool and the brakes will work fine again.

 

A set of center caps for sale, not mine:
https://www.tacomaworld.com/threads/icon-rebound-trd-custom-center-caps.758063/#post-27024819

 

Take a look at this thread. https://www.tacomaworld.com/threads/fn-overlander-wheels-spec-a-and-b-show-em-if-you-got-em.459586/
According to the recent posts at the end, FN wheels is still (can still?) make these. Not sure how similar they are to the TRD wheels though. Looks like they might be 1" larger. But might be worth giving them a call.

 

$200 for center caps? Staaahp now you got me thinking of parting out my perfectly good truck.

 

Yep, https://www.ebay.com/sch/i.html?_from=R40&_nkw=PTR18-35092&_sacat=0&rt=nc&LH_Sold=1&LH_Complete=1

 

Those bolts are a very uncommon M8x1.0 pitch thread. I wasnt able to find a source for them other than Toyota.

The Toyota P/N: PTR18-35093. Comes with 12 bolts with Loctite and 12 of the little plastic washer things.

From what my parts guys told me they are getting low on supply, if you have trouble getting them let me know I can send you a few spares.

 

Damn, $4 for the 12 bolts, $12 for shipping....Guess I need to find more parts to order for free shipping...

 

The Toyota P/N: PTR18-35093 T30 8x1mm bolts are about 2.5mm shorter than the Rock Warrior T30 8x1mm bolts. The RW bolts are 8x the price for a bag of 12.

 

Honestly its probably one of the best price/value parts that Toyota sells

 

I guess $5.50 local pickup aint bad. Thanks for the parts number, ordering

 

Also $200 for center caps is wild. There are tons of TRD center caps on ebay in the $60 range.