Aftermarket front camera

I taped the connection of the red and black plug. Then I took the black/red wire and put on a one of those ring wire connectors on the end and grounded it under the horn bolt.

 

Resurrecting this thread. Is there consensus on the best aftermarket camera to use when mounting in the oem pro grille hole?

 

has anyone tried this one?

 

Maybe a description or link to that camera would be helpful...

I've got the raayoo, not installed. Ill need a set of something similar to 'reducing washers' as we refer to them in the trades (as mentioned earlier in this thread). Now that I see that one though, I am wondering if the degree of the pitch could be useful in determining how close my front bumper is to something because I'm assuming with it faced down like that the bumper would be in the fov.

Also, after mocking up the raayoo its clear to me that the one you have pictured would be easier to mount because of it's square shape.

The raayoo is the perfect size- so perfect, in fact, that it just barely slips through the mounting hole on a pt228-35200 pro grill which necessitates a washer/ bezel of some sort.

 

yes! wondering what you found. lots of feedback on how people modified but wonder if there is a winner.

Also do most of these camera work with the ABC kits?

 

I’m still using the ruyeot, I like the way the rayoo or whatever looked better, but happier that I know I won’t have any issues with it rotating and I don’t have anything sticking it in place besides an easy to remove mount.

All the ones I posted work with the ABC kit, that’s what I have.

 

so you have the the link for that one, the rayoo?

As well did you have to 3d print or something?

 

It’s all in this thread. I am using a 3D printed bracket with the Ruyeout

 

Anyone have a link to purchase the Ruyeout camera. I have search all the different spellings and can not find it. thanks

 

PM’d you regarding the 3D printed mount

 

It’s on the first page, looks like the name got changed.

Car Reverse Backup Rear View Camera Mini Parking Camera with HD 170 Degree Fisheye Lens Starlight Night Vision

https://www.amazon.com/dp/B07TPD5DYR

 

Can you clarify this? I have the rayoo plus anytime and I am getting no imgage from the front cam. I taped the red wire coming off the yellow plugged RCA as I have read that it is not needed (and hot). The pair of red and black wires off of the black RCA (that connects to the red rca on the cam) - I cut/taped the red and only grounded the black (after separating the wires). In your comment it seems like you are saying you grounded both the red AND the black for that pair- is that correct?

Any info would be helpful and much appreciated!

 

Did you ever figure this out? What did you do with that pair of black and red wires?

 

I just finished the install and let me tell you what I did to make it work.

I installed this using a Heigh10 headunit, so it may be slightly different with yours. The RCA video cable has a small red power cable on each end. I used the red end next to the headunit and connected it to the 12v power cable at the headunit.

The RCA red cable on the camera end is attached to the red cable on the Black / red wire pair. The black cable on the pair I grounded. This made it work.

 

@DamGuide, are you still making the 3D print mount for the Natika ABC?

 

yep, I don’t check daily, but I’m still around

 

I'll shoot you a DM. Would like to pick one up.

 

I’d be interested in purchasing the mount too if you are still making them!

 

Has any figured out how to remove the lines and reverse image? I just installed ruyeout camera. On Amazon it said cut green wire

 

What is the part number for that grille? I want to get the same one.