Footwell Lights That Don't Suck (2nd Gen Edition!) - In Stock!

Production harness without tape:

 

@AJKlug1 Where's the connector pic or instructions of the remote start?

 

if that harness is down by the kick panel area i don’t thinkkk that it’s used for the remote start and we should be ok! i’m not 100% tho

 

We have foot well lights in our trucks?

 

you must not of read lmao. this is a kit to add them lol

 

You must be new around these parts. I skim... A LOT.

That's sort of what I figured, but I wasn't too sure either.

 

There was a video I saw online of the 12 volt install for our trucks. Maybe that would help us narrow down the plug? Now that I know 12 volt solutions makes a plug and play kit, now another thing I’m gonna buy

With that being said, I am now interested to know if they use the same plugs or different ones for my own interested! I ordered the footwell lights and plan on ordering the remote start as well!

 

I watched the video and he doesn't touch the connector utilized in the 2nd Gen Footwell Harness, so you should be good to go!

 

Awesome. where exactly is the plug located is it further down by the kick panel? or up near the fuse box?

 

Right in line with the fuse box

 

That is terrific! You guys are awesome! I’m really looking forward to my lights arriving come April!

 

Im not entirely sure as there are multiple connectors on the 12v kit. I dont remeber them plugging into a module at all though. Some on the steering column one down in the door harness etc. Let me watch the install videos again.

 

If this is where the connection is made then no the 12v solutions remote start kit will NOT interfere.

 

See above comments; it does not interfere.

 

Hey everyone! I hope you're all doing well. Thanks to everyone that has pre-ordered. I just want to take a moment and give an update on our timeline. So originally we had these slated for late March, but due to the COVID shutdowns overseas, our factories are unable to get in and do work at their normal pace. The good news is, before the shutdowns, the harnesses and other components were nearly done. With the current shutdown timeline (they are estimating another 5 days of isolation), we are expecting orders to start rolling out in 2-4 weeks. Thank you all for your patience, and if you have questions just let me know. I'm sure it's frustrating given the moving timeline, but we're all doing our best. Thanks!

 

@kmorgan3 thanks for the update, we appreciate you! Of course we all want things immediately but understand how things work with the pandemic. As long as the lights truly don’t suck I think we can wait!

 

Thanks for the update! Eagerly waiting to find the package at my front door to further feed my modding addiction.

 

Will these work on the 2.5 gen regular cabs that aren't prewired? I have a 2012 base model 4wd and its not prewired for anything so just adding cruise is gonna be expensive so before I bought these lights I want to make sure they will work.

 

Remove the cubby that gives you access to the cab fuses.
Look for this connector:

Blue wire on slot 9 of 1E.

If the single cab has it, you're good to go.