What Have You Done To Your 2nd Gen Tacoma Today?

Finished my bed platform. Super snug with pressure points rather than fastened and can be taken out in less than one minute.

 

Picked up my new wheels from the powdercoater then hopped on a plane from Austin Texas to checkout the mint400 in Vegas

 

There isn't a "do not like" button. Hopefully your truck isn't hurt too bad.

Try rubbing compound, then polishing compound.

 

Installed some heim outer tie rods. I have been going through boots on the stock ones far too often.



Modified the front bumper to go along with the trimmed fenders as well. This is one of those things that’s been bothering me forever but I kept putting it off. Quick little job that makes a huge difference.

 

I’d be interested, is it black? Can you send photos? Thanks!

 

Did my 120k maintenance this weekend, found this little gem... still not sure what I'm going to do about it.

 

Put a nut over the top and weld inside the hole of the nut to the bolt, then dump some penetrating oil on it let it sit and you should be able to back it out

 

Well shit. Doing a basic oil change and while looking around I found the infamous sheet metal crack, this is the drivers side. Pass side is cracked too, but only about an inch

 

Link to where you buy this
Took mine off a year ago still have some add that i cant get off

 

Added a glovebox light! It's the little things...

 

Cleaned the MAF sensor and throttle body. Replaced the PCV valve.
Exciting stuff

 

The broken bolt or the crack in the crossmember?

 

The bolt doesn't appear broken. Its the crack that is the problem.

 

weld it

 

Yes it's black. I have a few pics in my media, although the light makes it look like it's not black. Not sure how much, need to research it. It's going to be at least two weeks before I can get to it, busy with work and a family obligation coming up next weekend. I'll post it in the 2nd gen marketplace when I'm ready. Thanks for asking.

 

Unpacked to make sure it was undamaged by the shipper. This thing was well packed and survived the trip from South Africa to New Jersey and then to my driveway in Va. Can't wait to get it installed. Wish I didn't have to wait!!


A little swag...

So far I'm impressed with the quality of this thing!

 

Welcome to the alu cab family you'll love it

 

https://uglyshieldremoval.com/product/ugly-juice-adhesive-remover/

Its honestly pretty pricey because its a gallon on the website. At the shop locally he sold it in squirt bottles. You may be able to call and get a smaller amount. I used maybe 1/10th of the squirt bottle for both sides of the bed. It can be used on plenty of other applications too he said.

 

Installed the Clazzio leather seat covers. It took some finessing to make it fit. Very happy with the results.

 

Yea thats a bit much for what I need
will def try to contact him

Thanks!